328 engine ID tag?? Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A » Archive through September 11, 2003 » 328 engine ID tag?? « Previous Next »

Author Message
Barry Wolinsky (308gtb)
Member
Username: 308gtb

Post Number: 651
Registered: 2-2002
Posted on Tuesday, September 02, 2003 - 6:53 pm:   

John,

Yes, mine's a 1976 308 GTB. Your tag should be in the same position. It's a little easier to see on my car without the air box in the way.

Upload

Barry
john roberts (Jr328gtb)
Junior Member
Username: Jr328gtb

Post Number: 56
Registered: 5-2003
Posted on Tuesday, September 02, 2003 - 6:36 pm:   

barry

nice camera work. based on your user ID, i assume that is a 308, not a 328 because i couldn't see the whole stamp on my 328 and i had no chance to take a picture of it

john
Barry Wolinsky (308gtb)
Member
Username: 308gtb

Post Number: 649
Registered: 2-2002
Posted on Tuesday, September 02, 2003 - 3:54 pm:   

Upload

Upload
john roberts (Jr328gtb)
Junior Member
Username: Jr328gtb

Post Number: 55
Registered: 5-2003
Posted on Tuesday, September 02, 2003 - 1:05 pm:   

i found it...it is located on the top of the engine block, on the right side, between the V....it almost looks stamped on the block vs. a tag
john roberts (Jr328gtb)
Junior Member
Username: Jr328gtb

Post Number: 54
Registered: 5-2003
Posted on Monday, September 01, 2003 - 12:16 pm:   

That may have happened, although i doubt it considering the condition of the car.

But I don't know where it is supposed to be to even check that out...any ideas?
308 GTS (Muteki)
New member
Username: Muteki

Post Number: 17
Registered: 8-2003
Posted on Sunday, August 31, 2003 - 11:11 pm:   

It might be like my car, where the rivets rusted and the tag was about to fall off, so I removed it. I plan to remount it, but after we paint the engine compartment. Maybe the previous owner removed it as well. If you have conatct check with him, replacements are quite expensive when you incorporate the embossing of your vehicle's info.
john roberts (Jr328gtb)
Junior Member
Username: Jr328gtb

Post Number: 52
Registered: 5-2003
Posted on Sunday, August 31, 2003 - 6:45 pm:   

I was doing a little exploring on my 1989 328 today and comparing the tags/labels with the manual just to check originality etc....They are all fine and actaully in pretty good shape but i couldn't find the actual engine #/ID tag. It shows in the manual as being located somewhere but not clear to me exactly where....Any suggestions?

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration