Removing the cats in a 360 Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A » Archive through September 11, 2003 » Removing the cats in a 360 « Previous Next »

Author Message
Manu (Manu)
Member
Username: Manu

Post Number: 823
Registered: 2-2002
Posted on Friday, September 05, 2003 - 11:21 am:   

In our experience - it DOES eventually trigger a warning light - which does not affect the running of the car. It only annoys visually. Having said that the Lambdas may not necessarily be getting the *optimal* readings - as such fitting will noticeably cut torque at the bottom end to give a *marginal* increase in power at the top (achived by backpressure reduction).
This issue can be prevented by fitting lamda simulators.

None of this sh!t matters to our customers though who take the step to remove the cats on the 360 - They only care about the sound - and the sound though is AMAZING - probably too loud for most people. But UNBELIEVABLE nonetheless.
I have soundclips to PROVE IT.
van mollenberg (Vanny)
Junior Member
Username: Vanny

Post Number: 126
Registered: 4-2001
Posted on Friday, September 05, 2003 - 8:44 am:   

if you remove the cats and replace them with a test pipe how will this effect the oxygen sensors readings-there will be no difference -will the lights stay on all the time -tubi does make a pipe for the 360-opinions

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration