Removing the cabin temp sensor in 348? Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A » Archive through September 11, 2003 » Removing the cabin temp sensor in 348? « Previous Next »

Author Message
j scott leonard (Jscott)
Member
Username: Jscott

Post Number: 562
Registered: 1-2002
Posted on Monday, September 08, 2003 - 10:11 pm:   

Tying to isolate the problem. The a/c starts out then goes to outside temp. The compressor clutch comes on with the switch. Checked the relays, reset the ECU's, had the system charged, don't know what else it can be. Any thoughts?
Craig (Beachbum)
Junior Member
Username: Beachbum

Post Number: 191
Registered: 9-2002
Posted on Monday, September 08, 2003 - 6:13 pm:   

Jscott, what makes you think the sensor is bad?
Jeff B. (Miltonian)
Member
Username: Miltonian

Post Number: 554
Registered: 12-2002
Posted on Monday, September 08, 2003 - 10:54 am:   

JScott: I THINK there are two screws on brackets down on the bottom of the panel, if you peel back the upper edge of the carpet. Sorry I don't have time to check right now. Good luck!
j scott leonard (Jscott)
Member
Username: Jscott

Post Number: 560
Registered: 1-2002
Posted on Monday, September 08, 2003 - 8:24 am:   

Has anyone done this? Suggestions on removal?
Thanks
j scott leonard (Jscott)
Member
Username: Jscott

Post Number: 559
Registered: 1-2002
Posted on Sunday, September 07, 2003 - 10:32 pm:   

Can someone please tell me how to remove the interior temp sensor in my 348? It is in a dash piece on the driver side. Does the entire dash need to be removed? Anybody do this before? Mine is on the fritz (I think).
Thanks,
Scott

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration