| Author |
Message |
Brent Lachelt (Brent_lachelt)
Junior Member
Username: Brent_lachelt
Post Number: 53
Registered: 4-2002
| | Posted on Monday, September 29, 2003 - 8:55 pm: | |
Thanks all!!
I'll let you know what happens
|
Bill Sebestyen (Bill308)
Member
Username: Bill308
Post Number: 538
Registered: 5-2001
| | Posted on Monday, September 29, 2003 - 4:02 pm: | |
Brent,
Koni NA said they could do it for me a couple of years ago. They can be reached at:
http://www.koni-na.com/
TrueChoice can also do it. They can be reached at:
http://www.truechoice.com/contact/index.asp
Let us know how you make out. |
Philip Airey (Pma1010)
Member
Username: Pma1010
Post Number: 454
Registered: 7-2002
| | Posted on Monday, September 29, 2003 - 9:28 am: | |
There's an outfit in the UK selling shorter springs that are 40% stiffer as an alternative. Suggest you check the clearance. When I looked at it, I am not sure I could install the lowered perches without fouling the lower control arm at the front when fully lowered.
Also, remember you'll need an alignment afterwards |
Mike Charness (Mcharness)
Intermediate Member
Username: Mcharness
Post Number: 1058
Registered: 8-2002
| | Posted on Monday, September 29, 2003 - 8:27 am: | |
www.happyisgood.com/perch/index.htm |
Brent Lachelt (Brent_lachelt)
Junior Member
Username: Brent_lachelt
Post Number: 52
Registered: 4-2002
| | Posted on Monday, September 29, 2003 - 12:21 am: | |
I remember a while back that several 308 owners were discussing lowering their 308's by using lowering perches with stock koni shocks and springs. Did anyone put together a group buy? I'm looking to buy a front set. Any info on how to get these perches would be appreciated.
Thanks,
Brent |