Would 355 seats fit in a 328? Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A » Archive through October 20, 2003 » Would 355 seats fit in a 328? « Previous Next »

Author Message
DGS (Dgs)
Member
Username: Dgs

Post Number: 357
Registered: 5-2003
Posted on Wednesday, October 01, 2003 - 3:18 pm:   

I can't find it, now, but at one point I found a page that indicates that the Recaro's height adjustment is built into the pedestal mount. They didn't list a mount for the EVO8, either ... but the stock seats in an EVO are the Recaro Sport.

Sparco has both slide and fixed mounts.

One dealer on the web listed the Ergomed DS with all the options (lumbar, adjust side bolsters, heat) for about $2400. (Basic model in fabric, around $1900.) The SRDs are a bit cheaper, at $559.
James I. Movich (77_308gt4)
New member
Username: 77_308gt4

Post Number: 36
Registered: 2-2003
Posted on Wednesday, October 01, 2003 - 2:54 pm:   

good question, russ,

what DOES a set of seats go for?
Michael Vaughan (Vanimal)
Junior Member
Username: Vanimal

Post Number: 81
Registered: 3-2003
Posted on Wednesday, October 01, 2003 - 10:10 am:   

I emailed recaro in europe and the reply stated that they do not carry any mounting rails for ferrari.
DGS (Dgs)
Member
Username: Dgs

Post Number: 351
Registered: 5-2003
Posted on Wednesday, October 01, 2003 - 12:10 am:   

If you're not going for originality, why not go with a good aftermarket seat, like Recaro or Sparco? Both offer mounthing brackets for various applications.
Russ Turner (Snj5)
Member
Username: Snj5

Post Number: 528
Registered: 2-2003
Posted on Tuesday, September 30, 2003 - 8:46 pm:   

Any mods neccesary or did the rails+seat bolt in?
What's a set of 348 seats go for?
thanks
rt
Mark Eberhardt (Me_k)
Member
Username: Me_k

Post Number: 739
Registered: 5-2002
Posted on Tuesday, September 30, 2003 - 8:44 pm:   

I got 348 seats in mine. Tight, but they went.
M Grande (Grande)
Junior Member
Username: Grande

Post Number: 85
Registered: 12-2001
Posted on Tuesday, September 30, 2003 - 7:01 pm:   

No....tried it...too wide and too tall...and you have to manufacture a bracket (not that hard). The 308/328 seats are fairly small.

Mike
Omar (Auraraptor)
Intermediate Member
Username: Auraraptor

Post Number: 1034
Registered: 9-2002
Posted on Tuesday, September 30, 2003 - 3:40 pm:   

If so what moddifications are needed?

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration