| Author |
Message |
Mark Collins (Markcollins)
Member
Username: Markcollins
Post Number: 384
Registered: 7-2002
| | Posted on Thursday, October 16, 2003 - 11:58 am: | |
James
On mine there is a dipstick on the underside of the 17mm bolt described. Gearbox takes 4.25ltrs IIRC |
Mitchell Le (Yelcab1)
Member
Username: Yelcab1
Post Number: 710
Registered: 11-2001
| | Posted on Wednesday, October 15, 2003 - 11:47 pm: | |
Sorry
Since James' tag is 77 308GT4, I had assumed he asked for that. My mistake, please ignore the comments. |
billy bob (Fatbillybob)
Member
Username: Fatbillybob
Post Number: 389
Registered: 8-2002
| | Posted on Wednesday, October 15, 2003 - 11:25 pm: | |
It is actually 17mm on 348's |
Mike McGaffee (Mikey)
New member
Username: Mikey
Post Number: 18
Registered: 8-2003
| | Posted on Wednesday, October 15, 2003 - 6:25 pm: | |
Mitchell,
You are wrong.
On the 348, it's on the driverside, near the CV joint. it's a 12mm nut and its vertical to the car.
It looks like a holding bolt but it's not. |
Mitchell Le (Yelcab1)
Member
Username: Yelcab1
Post Number: 709
Registered: 11-2001
| | Posted on Wednesday, October 15, 2003 - 6:20 pm: | |
There is no dip-stick. In order to check it, you
1. Jack it up on stands, level it
2. Crawl underneath, on the side of the tranny toward the rear of the car, you will find a plug. Open that.
3. If there is just a little weepage of oil, then it is at the right level. If not, you fill it up until it weeps.
4. To fill it, you need a hand pump.
|
James I. Movich (77_308gt4)
New member
Username: 77_308gt4
Post Number: 46
Registered: 2-2003
| | Posted on Wednesday, October 15, 2003 - 3:50 pm: | |
OK, i give. Where is the fill/dipstick/whatever! for the transaxel case? i cant find and am getting frustrated. i have looked at the manual, BTW, just does not seem to match....
ARGUUUGHHH!!! |