VOODOO SHIFT KNOB- WHERES MIKE CHARNESS

Log Out | Topics | Search Moderators | Edit Profile

Author Message Bruce Wellington (Bws88tr) Advanced Member Username: Bws88tr Post Number: 3371 Registered: 4-2002 Posted on Sunday, October 19, 2003 - 9:34 am:    THANKS MIKE AND GUYS FOR YOUR POSTS THE LOCK WASHER I PUT ON SEEMS TO HOLD NICELY...ILL WORRY MORE ABOUT CAM BELTS BREAKING AND CLUTCHES BEING WORN DOWN THANKS AGAIN ALL, BRUCE spanky mcdoogle (Spanky) New member Username: Spanky Post Number: 7 Registered: 10-2003 Posted on Saturday, October 18, 2003 - 5:49 pm:    Bruce, Seems you got the Ellen Lambo version of the shifter knob... Best, Spanky Mike Charness (Mcharness) Intermediate Member Username: Mcharness Post Number: 1122 Registered: 8-2002 Posted on Saturday, October 18, 2003 - 5:35 pm:    Bruce, there's originally a 17mm nut under your factory knob that you tighten (or tighten the shift ball against) to keep the shift pattern in the proper visual alignment. If you need to get a quick something from the hardware store, the shaft thread is 10 X 1.25mm -- they'll have a nut that will work, but it will likely be thicker than the factory one. Dave (Dave) Member Username: Dave Post Number: 613 Registered: 4-2001 Posted on Saturday, October 18, 2003 - 12:31 pm:    Have fun, and remember... Those Titanium knobs get pretty damn hot if you leave you car out in the sun. rrrrrrrrrrrr ouch oh ••••/ shift rrrrrrrrrrrrrr damn ouch / shift rrrrrrrrrrr Paul Hill (348paul) Member Username: 348paul Post Number: 428 Registered: 12-2002 Posted on Saturday, October 18, 2003 - 12:30 pm:    Bruce, If you can't get hold of a locknut - let me know and I will pop one in the post to you. Paul Bruce Wellington (Bws88tr) Advanced Member Username: Bws88tr Post Number: 3369 Registered: 4-2002 Posted on Saturday, October 18, 2003 - 12:26 pm:    DAVE NO LOCK WASHER OR ANYTHING IN THE OLD BLACK KNOB,,,I JUST PUT A LOCK WASHER ON IT, SEEMS TO WORK, BUT I KNOW THERE IS SOMETHING ELSE THAT CAME WITH THE KNOB...ANYWAY,,IT WORKS, CANT SEE THE WASHER, AND IM GOING TO DRIVE IT TODAY... THANKS DAVE, BRUCE Dave (Dave) Member Username: Dave Post Number: 611 Registered: 4-2001 Posted on Saturday, October 18, 2003 - 12:19 pm:    Bruce, check to see if the old lock nut in stuck in the bottom of the ole black knob. Bruce Wellington (Bws88tr) Advanced Member Username: Bws88tr Post Number: 3368 Registered: 4-2002 Posted on Saturday, October 18, 2003 - 12:15 pm:    MIKE CHARNESS ARE YOU HERE?? JUST GOT MY VOODOO SHIFT KNOB FOR MY TR TOOK OFF THE OLD BLACK OEM TYPE, PUT THE NEW TITANIUM KNOB ON , SCREWED IT ON AND THE SHIFTING DISPLAY IS ALWAYS BACKYARDS WHATEVER WAY I START IT IS THERE A TRICK TO PUT IT ON, OR AM I MISSING A LOCK WASHER OR RUBBER PIECE THAT FITS ON FIRST, AS THIS IS SO ELEMENTRY BUT ITS NOT LINING UP STRAIGHT ANY HELP GUYS?? I APPRECIATE IT THANKS, BRUCE