Author |
Message |
Armen Gugasian (Ag512bbi)
Junior Member Username: Ag512bbi
Post Number: 85 Registered: 6-2002
| Posted on Wednesday, October 22, 2003 - 1:35 pm: | |
I've used Jason a number of times. I highly recommend him!!! he is VERY good. |
Steve Schwartz (Fastred355)
New member Username: Fastred355
Post Number: 6 Registered: 10-2003
| Posted on Tuesday, October 21, 2003 - 5:10 pm: | |
Des- good to hear from you. Can you believe, my 6th. post. I'm still rock'n. Jasmine misses you, and your too late, Roxanne is gone. STEVE
|
DES (Sickspeed)
Senior Member Username: Sickspeed
Post Number: 7387 Registered: 8-2002
| Posted on Tuesday, October 21, 2003 - 5:02 pm: | |
STEVE...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You finally registered...!!! That's awesome...! Welcome to FerrariChat...! How the hell are you...? i hope all is well... |
Steve Schwartz (Fastred355)
New member Username: Fastred355
Post Number: 5 Registered: 10-2003
| Posted on Tuesday, October 21, 2003 - 4:59 pm: | |
Jordan-he does all cars. 911 Fan- He does all the work without taking the tire off. The front or back end is lifted, he spins the tire with a custom made device under the tire, all edge sanding(total paint removal)done with a sander while tire is rotating, spokes down with sander without spinning. He tapes off the tire, emblems, bolts and air brushes the rim while controlling the turning. He has this down to a science. STEVE |
911 Fan (911fan)
Junior Member Username: 911fan
Post Number: 85 Registered: 5-2003
| Posted on Tuesday, October 21, 2003 - 2:18 am: | |
How can he do a thorough job without removing the wheel and the tire?
|
Jordan Witherspoon (Jordan747_400)
Intermediate Member Username: Jordan747_400
Post Number: 2297 Registered: 12-2002
| Posted on Tuesday, October 21, 2003 - 12:50 am: | |
Only do Ferraris? My Mustang's wheels are a bit scraped up. |
LC (150shot)
Junior Member Username: 150shot
Post Number: 63 Registered: 6-2003
| Posted on Tuesday, October 21, 2003 - 12:48 am: | |
Wow-home service? thats the first time I've heard of that. |
Steve Schwartz (Fastred355)
New member Username: Fastred355
Post Number: 4 Registered: 10-2003
| Posted on Monday, October 20, 2003 - 10:16 pm: | |
...and reasonable |
Steve Schwartz (Fastred355)
New member Username: Fastred355
Post Number: 3 Registered: 10-2003
| Posted on Monday, October 20, 2003 - 10:13 pm: | |
Recently had Jason Irby of United Wheel Techs (714.608-2928)repair my scraped right rear wheel (parking too close to the curb). He was a little hard to get hold of, but once done I was impressed. He showed up at my house on time, sets up in the driveway,raises the car, mixes the paint, sands to the metal, primes, paints, and seals. One wheel done in one hour. Extremely convenient. |