Author |
Message |
Russ Turner (Snj5)
Member Username: Snj5
Post Number: 383 Registered: 2-2003
| Posted on Tuesday, August 19, 2003 - 7:38 pm: | |
Thanks. Trying to modernize the Blaupunkt as the engine goes retro Of course, I won't be able to hear it anyway..... |
Peter Polasek (Peterp)
Junior Member Username: Peterp
Post Number: 120 Registered: 8-2002
| Posted on Tuesday, August 19, 2003 - 6:10 pm: | |
Call Crutchfield -- they sell Blaupunkt and will know the answer. |
dave handa (Davehanda)
Intermediate Member Username: Davehanda
Post Number: 1666 Registered: 5-2001
| Posted on Tuesday, August 19, 2003 - 4:48 pm: | |
Call Blaupunkt or a local installer, but the short answer is "probably". I just swapped out a Kenwood cd player that was 6 years old with a new one, and they still use the same connector on back. Made installation a snap. They did change the sleeve slightly though, so I had to remove the old sleeve and install the new one (extra 5 minutes) total swap took 10 minutes. I spent more time programing the stations and clock! Even if the plug is different, splicing the wires is real easy, as there usually is only 7 or 8 wires plus the antenna. If you are running seperate amps, the only 3 or 4 wires... Dave |
Russ Turner (Snj5)
Member Username: Snj5
Post Number: 380 Registered: 2-2003
| Posted on Tuesday, August 19, 2003 - 1:57 pm: | |
Will a newer DIN Blaupunkt CD/reciever swap out to the same harness connectors as a DIN Blaupunkt cassette/reciever? many thanks rt |