| Author |
Message |
Frank Parker (Parkerfe)
Member
Username: Parkerfe
Post Number: 907
Registered: 9-2001
| | Posted on Friday, May 17, 2002 - 12:36 pm: | |
I have the raised magnetic SF stickers on my 348 and they look great. However, the enamel ones that are indented in to the wings look MUCH better. Bo Pirkle, 770.939.6982 will install them for you for around $500.00 per side not counting the cost of the badges. |
ELI (Titanium360)
New member
Username: Titanium360
Post Number: 21
Registered: 4-2002
| | Posted on Friday, May 17, 2002 - 8:11 am: | |
Rob:
I got mine from Nick and they look great. They are identical to the original coming from the factory. He is suppose to get more in on the 360 badges within the next few weeks. i will try to post some pictures over the weekend for you. |
bruce wellington (Bws88tr)
Junior Member
Username: Bws88tr
Post Number: 228
Registered: 4-2002
| | Posted on Thursday, May 16, 2002 - 5:23 am: | |
robert
i bought the s/f shields in vinyl for my tr for 25.00 / set . They fit perfectly, dont fall off, and look great with no cosmetic exterior autobody work... my 2 cents..
bruce |
nick m........ (Nickm)
Junior Member
Username: Nickm
Post Number: 76
Registered: 8-2001
| | Posted on Thursday, May 16, 2002 - 2:03 am: | |
Hi Robert,
Where did you buy your badges? Ebay?
If you did, email me.
PS. I have SF fender badges, but haven't tried to sell them on ebay yet. Soon though. |
Jim E (Jimpo1)
Member
Username: Jimpo1
Post Number: 437
Registered: 7-2001
| | Posted on Wednesday, May 15, 2002 - 3:28 pm: | |
Lets start the shield thread again! Buy the raised "plastic" shields for $12/ea, stick them to some magnetic backing available at any sign store, then add/remove them as your whims take you. Save big $$$ vs getting your fenders pounded. |
ELI (Titanium360)
New member
Username: Titanium360
Post Number: 19
Registered: 4-2002
| | Posted on Wednesday, May 15, 2002 - 2:29 pm: | |
Rob:
When looking at the driver side, the top right corner of the shield is 72mm from the door (excluding door gap). The bottom edge of the shield is 84mm from the door (again, excluding door gap).
Sorry I only have a metric ruler (: I believe that 1 inch is 25.4 mm
|
ELI (Titanium360)
New member
Username: Titanium360
Post Number: 17
Registered: 4-2002
| | Posted on Wednesday, May 15, 2002 - 2:22 pm: | |
Rob:
Did you buy the enamel shields from Nick? |
Martin (Miami348ts)
Intermediate Member
Username: Miami348ts
Post Number: 2074
Registered: 5-2001
| | Posted on Friday, May 10, 2002 - 3:22 pm: | |
Most every Ferrari dealer has them. Ours charges I believe $12 per batch. Original F-item!
|
Stephen Patterson (Srpatterson)
Junior Member
Username: Srpatterson
Post Number: 140
Registered: 11-2001
| | Posted on Friday, May 10, 2002 - 2:32 pm: | |
There is a nice, raised sticker, that has a plastic top coat. Much nicer than just a sticker, but still has adhesive backing. I've seen them for sale at Cavallino and Monterey for around $25 each.
Chris Parr has them all over his Expedition, transporter, etc. They come in both the shield, and the rectangle badge. |
Joseph Caretti (Pino)
New member
Username: Pino
Post Number: 24
Registered: 4-2002
| | Posted on Friday, May 10, 2002 - 1:34 pm: | |
Along the lines of Stephen's thinking, what about just ordering the sticker that came on the F40 or the 288 GTO? Is it available, am I assuming wrong that it is a sticker?
|
Stephen Patterson (Srpatterson)
Junior Member
Username: Srpatterson
Post Number: 138
Registered: 11-2001
| | Posted on Thursday, May 09, 2002 - 11:09 pm: | |
Of course, you could always just purchase the 360 fenders with the indentations, paint and install them, then add the badges. You should be able to do it for about $10,000.
OK, seriously now, has anyone ever tried making a shield on the soft, rubber type magnet material. This was you could take them off if you wanted.
Opinions? |
Chris Richardson (Boozy)
Junior Member
Username: Boozy
Post Number: 147
Registered: 11-2001
| | Posted on Thursday, May 09, 2002 - 6:23 pm: | |
They don't fit. They are meant to be mounted in fenders that have impressions for them. The only way to do it is to have a body shop beat the indentations into your fenders and repaint them. Very expensive proposition. |
Robert Jude Klein (Rjklein4470)
Junior Member
Username: Rjklein4470
Post Number: 80
Registered: 3-2002
| | Posted on Thursday, May 09, 2002 - 4:03 pm: | |
I have bought some 360 badges, the metalic ones and was wandering where people were mounting them, and how they were doing it. They do not fit really all that well. |