| Author |
Message |
tony liokossis (Tonybaloney)
New member
Username: Tonybaloney
Post Number: 2
Registered: 9-2002
| | Posted on Sunday, September 22, 2002 - 9:21 am: | |
Paul - I've been in contact with Exotic Auto Parts and they have none for now, but thanks. Dave, I actually have a complete set of 390s but I was hoping to get the 16 inchers. Shaunessey's number would be great if you have it, I'll give them a try - btw, would the different offset be a problem? |
Dave328GTB (Hardtop)
Junior Member
Username: Hardtop
Post Number: 249
Registered: 1-2002
| | Posted on Saturday, September 21, 2002 - 9:51 pm: | |
Tony,
Tom Shaunessey (sp?) in southern Caolifornia specializes in used wheels. I believe 86 Mondials came with the 390mm wheels which are kind of a waste. They then switched to 16 inch later. Although they are convex and look like late 328 wheels, they are different offset according to Speedline. Nevertheless, a used set of 16's should be reasonable and the 390's should be downright cheap. I can look up the Shaunessey's# if you need.
Dave |
Paul Newman (Newman)
Member
Username: Newman
Post Number: 499
Registered: 12-2001
| | Posted on Saturday, September 21, 2002 - 9:19 pm: | |
Just a thought, try www.exoticautoparts.com, they are in Toronto and seem to have used wheels except the QV ones. You can get his cell number from the site as well. Good luck. |
tony liokossis (Tonybaloney)
New member
Username: Tonybaloney
Post Number: 1
Registered: 9-2002
| | Posted on Saturday, September 21, 2002 - 4:39 pm: | |
This is my first post to Ferrari Chat and I must say it is a great forum. My problem is I recently purchased a euro '86 Mondial 3.2 Coupe with after market wheels. I'm trying to get my hands on original Ferrari 16" 328/Mondial wheels and my local Ferrari dealer quoted over CDN$10,000 for new ones! Any suggestions on how to get 16 inchers, new or used?
The aftermarket wheels are Gotti/Ronal 17", 5-spoke, 3-piece wheels with almost new Bridgestone RE730 tires which I am selling if anyone is interested. |
|