Plug for light socket 308GT4 (and oth... Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » General Ferrari Discussion Archives » Archive through November 06, 2002 » Plug for light socket 308GT4 (and others?) « Previous Next »

Author Message
BRIAN FAHERTY (Brian)
New member
Username: Brian

Post Number: 5
Registered: 10-2002
Posted on Tuesday, October 22, 2002 - 11:35 am:   

Hans
Glad the plug worked out for you. Now you can run your 12v stuff with no problems and not cut up your car.

PS Dont forget you can put a male end on your battery charger and use the socket to put 12v to the battery, nice to not have to dig into the battery box
Hans E. Hansen (4re_gt4)
Member
Username: 4re_gt4

Post Number: 318
Registered: 4-2002
Posted on Monday, October 21, 2002 - 11:45 pm:   

Followp: Ordered the appropriate BMW motorcycle parts. Works perfectly. Wasn't totally positive if the 'GT4 was the same. I got the unit with the Ferrari/BMW plug on one end and the cig socket on the other end of a short cable. The plug fits with a 'snap' fit, and my cell phone charger works in the other end. The 'GT4 has the socket in the glove box, and the supplied cable is just right for the cig socket to hang out, if that's the way you want to use it. Else you could leave the cell phone charger and phone inside of the glove box.
Hans E. Hansen (4re_gt4)
Member
Username: 4re_gt4

Post Number: 291
Registered: 4-2002
Posted on Thursday, October 17, 2002 - 8:23 pm:   

Big welcome, Brian. And.... YOU DA MAN!!!

I was going to tear apart my glove box this weekend and install a conventional cig socket. But, WOHOOO! Now I don't have to. Ordered one this afternoon. (And thanks again, Dave, for bringing this to my attention.)
david handa (Davehanda)
Member
Username: Davehanda

Post Number: 261
Registered: 5-2001
Posted on Thursday, October 17, 2002 - 3:38 pm:   

Brian,
That is great, I am forwarding this info. to Ferrarilist too. Twice a year I see people trying to find those plugs to wire radar detectors and cell phones to. What a help.

Dave
BRIAN FAHERTY (Brian)
New member
Username: Brian

Post Number: 1
Registered: 10-2002
Posted on Thursday, October 17, 2002 - 2:56 pm:   

Hi guys,my first post
the socket in the glove box is just like the one on my BMW motorcycle.you can buy a male plug at any BMW shop $18, and fit it to 12 volt acc, I put a male plug on my battery tender and plug in the Mondial one night, the ductai the next night, and the bmw the last night. I do this once a month. I also got a male plug/american lighter adaptor from one of the BMW vendors on the web, I use this for the cell phone.
AS for the lighter on the console, I bought an extra tenex snap used on the boot cover. It looks like a black cap with the prancing pony on it. I simply stick this over the open lighter hole.
I have to open the glove box to use the charger on the phone but its a minor problem. I like not messing with three batterys and only having to plug in the same plug on three toys.
try these web sites and see if the BMW shops have the male plugs
www.bmwbobs.com
www.cyclegadgets.com
Hans E. Hansen (4re_gt4)
Member
Username: 4re_gt4

Post Number: 257
Registered: 4-2002
Posted on Wednesday, October 09, 2002 - 6:57 pm:   

Could you imagine bending over to puff on it to get it lit? I conjure up an image of a dog licking his balls.
Joel Belser (Driver)
New member
Username: Driver

Post Number: 2
Registered: 9-2002
Posted on Wednesday, October 09, 2002 - 5:49 pm:   

I can't imagine anyone ever using the cigarette lighter on the console!! You'd be asking for trouble.
magoo (Magoo)
Advanced Member
Username: Magoo

Post Number: 3221
Registered: 2-2001
Posted on Wednesday, October 09, 2002 - 8:42 am:   

Hans, Actually it is the same as a reg. cig. lighter in that it works on temp, heat , and kicks off when the lighter is hot. It just has the hole for the cigarette. I guess you could say the same about any lighter, "What if it doesn't kick off." I don't even like the reg. lighters because they could stick.
Hans E. Hansen (4re_gt4)
Member
Username: 4re_gt4

Post Number: 254
Registered: 4-2002
Posted on Tuesday, October 08, 2002 - 11:47 pm:   

Thanks Magoo. However, I think the existing hole is much smaller than needed for the "new and improved modern cig/accessory receptacle".

Gerrit: And you're not worried about having red hot stuff going on in your console? What if it doesn't click off? Scares the poop out of me. Besides, my cigars don't fit!!
magoo (Magoo)
Advanced Member
Username: Magoo

Post Number: 3220
Registered: 2-2001
Posted on Tuesday, October 08, 2002 - 10:47 pm:   

Sorry Hans, What I was suggesting was to use the existing hole in the box and reinforce the backing where the hole is and cut it out then install the receptacle. I wasn't suggesting to cut a new hole.
Gerrit Visser (Gerritv)
Junior Member
Username: Gerritv

Post Number: 104
Registered: 6-2001
Posted on Tuesday, October 08, 2002 - 7:10 pm:   

Correct operation of the stock cigarette lighter:
1. Insert cigarette into lighter
2. Push down the ring
3. When lighter goes 'ping', remove lit cigarette.
4. Stick unlit end of cigarette into mouth.
etc.

Same lighter was used in 1969 Alfa 1750 GTV's. MUCH safer than trying to line up a hot item to the end of a cigarette at 100+ mph!

Hans E. Hansen (4re_gt4)
Member
Username: 4re_gt4

Post Number: 252
Registered: 4-2002
Posted on Tuesday, October 08, 2002 - 6:00 pm:   

Magoo: Actually, being a little anal about originality, I think I'll just make a new piece and save the old one. If I do thicker material (boiler plate? <jk>), it should be OK.
magoo (Magoo)
Advanced Member
Username: Magoo

Post Number: 3217
Registered: 2-2001
Posted on Tuesday, October 08, 2002 - 5:39 pm:   

Hans, Pick a spot where you want to install the lighter receptacle and reinforce the back by glueing a thicker piece of metal or wood over the area. Cut the hole and install it.
magoo (Magoo)
Advanced Member
Username: Magoo

Post Number: 3216
Registered: 2-2001
Posted on Tuesday, October 08, 2002 - 5:35 pm:   

Ken, You are correct that the trouble light plugs into the left side of the dash of the 308 GTB-GTS models It seems the GT4 has that same plug in the glove box which Hans is changing over to a cig. lighter receptacle.
Hans E. Hansen (4re_gt4)
Junior Member
Username: 4re_gt4

Post Number: 249
Registered: 4-2002
Posted on Tuesday, October 08, 2002 - 2:32 pm:   

Ken: Read down a bit. We're not trying to plug anything into the bizarre cig lighter. Rather we're trying to get another source for the light plug and/or socket to make this power source compatible with other 'stuff'.
Ken Ross (Kdross)
Junior Member
Username: Kdross

Post Number: 153
Registered: 2-2002
Posted on Tuesday, October 08, 2002 - 1:42 pm:   

GUYS!!!! For the 308 series there is a plug the light goes into under the dash on the left of the steering wheel (right above where your left knee should be under the dash). The light is not meant to be plugged into the cig. ligher. The TR may also have this plug, but I am not sure. If you have any questions just look in your manual - its listed there.

Ken
Hans E. Hansen (4re_gt4)
Junior Member
Username: 4re_gt4

Post Number: 243
Registered: 4-2002
Posted on Tuesday, October 08, 2002 - 12:42 pm:   

Oops, 89TCab beat me to that last post. Those lighters are really frightening. I accidentally 'fired it up' one day trying to figure out how it worked. When I saw that bright red glow inside of my console, I started ripping out fuses.
Hans E. Hansen (4re_gt4)
Junior Member
Username: 4re_gt4

Post Number: 242
Registered: 4-2002
Posted on Tuesday, October 08, 2002 - 12:39 pm:   

Magoo: I will be tearing apart the glove box shortly to redo the fuse boxes. Gerrit explaned that it is easier that way. Anyway, I think I'll just build a new side piece, as it appears to be just some felt covered metal. I'll install a standard cig plug, I think, for compatibility with 'gadgets'.

I'd also like to replace that really scary console cig lighter. It's one of those antiques that heats up in place, and you push the cigarette down into it to contact the red hot element.
89TCab (Jmg)
Member
Username: Jmg

Post Number: 270
Registered: 9-2001
Posted on Tuesday, October 08, 2002 - 12:37 pm:   

I am not sure what kind of plug you have in there but my 89 Cab came with the euro cigarette lighter (push cigarette in lighter, remove when lit I guess...I ddin't use it) that I was able to simple swap out for a normal lighter plug that I picked up from FoS.
magoo (Magoo)
Advanced Member
Username: Magoo

Post Number: 3214
Registered: 2-2001
Posted on Tuesday, October 08, 2002 - 9:45 am:   

Hans, Let us know what you choose to use in place of the orig. receptacle.
Hans E. Hansen (4re_gt4)
Junior Member
Username: 4re_gt4

Post Number: 241
Registered: 4-2002
Posted on Monday, October 07, 2002 - 11:49 pm:   

My hope was to find a male plug to fit the glove box receptacle (and I'm NOT paying the stupid prices for a light, plus I hate to destroy one just to get the plug), and then wire it to a female cig lighter plug(s) for other uses. But Magoo is probably right - I think maybe I'll just change the glove box plug.
magoo (Magoo)
Advanced Member
Username: Magoo

Post Number: 3203
Registered: 2-2001
Posted on Monday, October 07, 2002 - 11:35 pm:   

Hans, If you get a plug how many accessories will you run off one plug? So it seems to me it would work much better if you did it this way. Convert the receptacle in the glove box to a female receptacle like a cig.lighter receptacle and use the other accessories that have the male cig. lighter plug.
david handa (Davehanda)
Member
Username: Davehanda

Post Number: 251
Registered: 5-2001
Posted on Monday, October 07, 2002 - 11:33 pm:   

Soda com has the light with baggie for $50
J. Grande (Jay)
Member
Username: Jay

Post Number: 602
Registered: 10-2001
Posted on Monday, October 07, 2002 - 11:16 pm:   

Have you looked on ebay? I saw the light being offered for a few bucks (maybe $50, can't remember)
Hans E. Hansen (4re_gt4)
Junior Member
Username: 4re_gt4

Post Number: 240
Registered: 4-2002
Posted on Monday, October 07, 2002 - 10:12 pm:   

Arrgh! The light is stupid expensive, just to get a plug.
magoo (Magoo)
Advanced Member
Username: Magoo

Post Number: 3201
Registered: 2-2001
Posted on Monday, October 07, 2002 - 9:55 pm:   

That plug is unique in that I hav'nt seen anything like it before. You could install another female type receptacle in place of it that would accept other accessories or buy the light and use the plug if another matching male plug can't be found.
Barry Wolinsky (308gtb)
Member
Username: 308gtb

Post Number: 299
Registered: 2-2002
Posted on Monday, October 07, 2002 - 12:44 pm:   

Hans,

I'm not sure if the plug is available separately, but Dennis McCann has the entire inspection light assembly available at:

http://www.allferrariparts.com

Check to see if he has just the plug available. You should be able to use the socket for your intended applications. I'm not sure of the circuit and fuse rating this socket is on in the GT4.

Barry
Hans E. Hansen (4re_gt4)
Junior Member
Username: 4re_gt4

Post Number: 238
Registered: 4-2002
Posted on Monday, October 07, 2002 - 11:46 am:   

In the glove box of the 'GT4 is a socket for the emergency light. Anyone know where to find a plug that will fit? If so, I could use this for G-Tech, radar detector, cell phone charger, etc.

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration