| Author |
Message |
Mark Collins (Markcollins)
New member
Username: Markcollins
Post Number: 26
Registered: 7-2002
| | Posted on Monday, October 28, 2002 - 4:20 pm: | |
I believe you can adjust the reach approx 3/4" on 355's
(well on Euro ones you can I assume US would be the same
If you lie down in the footwell look up under the column you will see a bracket with two bolts fitted through oblong sliders enabling you to adjust the reach.......unfortunately still not enough to make the driving position perfect unless you have 'gorilla' arms |
Modified348ts (Modman)
Member
Username: Modman
Post Number: 406
Registered: 11-2001
| | Posted on Wednesday, October 23, 2002 - 12:45 am: | |
Must be a mix up with a Diablo, the Diablo does both. The 355 doesn't.... |
Mr. Doody (Doody)
Member
Username: Doody
Post Number: 531
Registered: 11-2001
| | Posted on Monday, October 21, 2002 - 6:25 pm: | |
There was a thread about this previously. This is just a quick, confused followup.
The "tilt" part of the equation is fine. While the lever is hardly obvious, it's there and my wheel tilts no problemo.
Someone said that the wheel telescopes as well. Am I just a moron and I can't figure this out (and no, I did not RTFM)?
doody! |