Dallas Ferraristis Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » General Ferrari Discussion Archives » Archive through January 29, 2003 » Dallas Ferraristis « Previous Next »

Author Message
Charles Barton (Airbarton)
Junior Member
Username: Airbarton

Post Number: 134
Registered: 11-2002
Posted on Friday, January 24, 2003 - 12:14 pm:   

Jeff, see ya in Memphis!
Rob Lay (Rob328gts)
Board Administrator
Username: Rob328gts

Post Number: 3324
Registered: 12-2000
Posted on Thursday, January 23, 2003 - 4:52 pm:   

Ok, here's the deal, it's final...

Friday 4-5 pm at Norwoods

After that we'll meet at Humperdinks across Loop 12 for drinks, a little food, and maybe some pool. Last weekend when Greg, Jennie, and I were there it was Super Models night, so maybe we'll be that lucky again.
Rob Lay (Rob328gts)
Board Administrator
Username: Rob328gts

Post Number: 3323
Registered: 12-2000
Posted on Thursday, January 23, 2003 - 4:26 pm:   

Yep, because Bob owned the dyno and Bob isn't in James shop anymore.
Jim E (Jimpo1)
Intermediate Member
Username: Jimpo1

Post Number: 1224
Registered: 7-2001
Posted on Thursday, January 23, 2003 - 2:49 pm:   

I noticed yesterday that Norwoods didn't have the dyno in the shop any more. Does anyone know why?
Jeff Edison (Euro308guy)
Junior Member
Username: Euro308guy

Post Number: 188
Registered: 7-2002
Posted on Thursday, January 23, 2003 - 12:58 pm:   

I'm not aware of the specific location in Plano.
Sean Ruckel (Sruckel)
Junior Member
Username: Sruckel

Post Number: 146
Registered: 10-2001
Posted on Thursday, January 23, 2003 - 12:15 pm:   

Where in Plano are they going to dyno it? I may be up that way in the afternoon.
Jeff Edison (Euro308guy)
Junior Member
Username: Euro308guy

Post Number: 187
Registered: 7-2002
Posted on Thursday, January 23, 2003 - 11:59 am:   

OK,
I plan on arriving in Dallas at about 8:50 on DAL. I will catch a ride over to Norwood and hang around a few hours most likely. The I'm off to Plano to watch the dyno, if they'll allow it, (my guess is they will). After that, I shall drive around for the afternnon and then, barring any problems, or "glitches", I'll spend the night in Dallas and leave for Memphis in the morning. I'll be out and about there locally friday night for dinner if anyone is up for it.
Charles, If you'll swing by Little Rock, on the way, I'll be happy to let you have a look, otherwise, plan on coming to Memphis for our annual car show! Bring your 348. I'll be there.
Jeff
Charles Barton (Airbarton)
Junior Member
Username: Airbarton

Post Number: 129
Registered: 11-2002
Posted on Thursday, January 23, 2003 - 11:01 am:   

Jeff stop in Atlanta on the way back to Memphis so I can see the car! I also have a TS and am very interested in seeing what Norwood did.
Jeff Edison (Euro308guy)
Junior Member
Username: Euro308guy

Post Number: 186
Registered: 7-2002
Posted on Thursday, January 23, 2003 - 10:24 am:   

I guess I'll be arriving at Norwoods abuot 10am or so. Things are still a bit tentative, but it does look good. After that I'm going with the Norwood guys over to the dyno to watch the dyno run and hopefully, learn a bit about the Motec tuning. I'll post later today my EXACT palns. I'm working on them now.
J
Byron (Bmyth)
Junior Member
Username: Bmyth

Post Number: 180
Registered: 10-2002
Posted on Thursday, January 23, 2003 - 10:08 am:   

Oh man.... I'm flying into dallas tomorrow, too... Only, my schedule doesn't free me up until saturday afternoon.... Jeff, any chance you'll still be around then so that I can check out the 550hp monster? :-) I'd really love to see it!
Rob Lay (Rob328gts)
Board Administrator
Username: Rob328gts

Post Number: 3312
Registered: 12-2000
Posted on Thursday, January 23, 2003 - 9:03 am:   

I would rather do a 4 or 5pm happy hour Friday somewhere, but I'm flexible. It's up to you Jeff and are you going to be in the area of Norwoods? If so, we can meet there and then head over to Humperdinks accross the street.
Tillman Strahan (Tillman)
Member
Username: Tillman

Post Number: 337
Registered: 11-2001
Posted on Thursday, January 23, 2003 - 7:29 am:   

I'm working Saturday, but probably could do a long lunch on Friday. I don't have my car, though -- it's at FoD for recall work.
Jeff Edison (Euro308guy)
Junior Member
Username: Euro308guy

Post Number: 182
Registered: 7-2002
Posted on Wednesday, January 22, 2003 - 4:05 pm:   

Glad you had a look Jim. Did you hear it run? I heard they had it fired up!
Jeff Edison (Euro308guy)
Junior Member
Username: Euro308guy

Post Number: 179
Registered: 7-2002
Posted on Wednesday, January 22, 2003 - 4:04 pm:   

Looks like I'll be arriving in Dallas on FRIDAY now. Seems Wheels America couldn't get one of my front tires to reseal the rim. I bought two more. They're being mounted now. They'll go to Norwoods' tomorrow and I'll stop by about 10am or so on Friday. I plan on spending the day and night in Dallas and driving back to Memphis Staurday- mid day.
Let me know...............
Jim E (Jimpo1)
Intermediate Member
Username: Jimpo1

Post Number: 1215
Registered: 7-2001
Posted on Wednesday, January 22, 2003 - 1:44 pm:   

Well THAT figures! I was just there 20 minutes ago getting my oil changed. Saw your car Jeff, I think you'll have fun with it.

I'm out of town tomorrow or I'd join you.
Rob Lay (Rob328gts)
Board Administrator
Username: Rob328gts

Post Number: 3306
Registered: 12-2000
Posted on Wednesday, January 22, 2003 - 1:24 pm:   

At Norwoods? What time?
Jeff Edison (Euro308guy)
Junior Member
Username: Euro308guy

Post Number: 177
Registered: 7-2002
Posted on Wednesday, January 22, 2003 - 12:30 pm:   

Anyone in Dallas like to get together for chow or drinks tomorrow? I plan to pickup my 348ts TT. A viewing of the Norwood facility, (coolest F-car shop on the planet), may also be possible.
(901) 428-0560 or e-mail me. I'll be checking.
Jeff

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration