WE NEED YOUR HELP - WHAT DOES THIS FIT ? Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » General Ferrari Discussion Archives » Archive through January 29, 2003 » WE NEED YOUR HELP - WHAT DOES THIS FIT ? « Previous Next »

Author Message
Rob Schermerhorn (Rexrcr)
Junior Member
Username: Rexrcr

Post Number: 179
Registered: 11-2002
Posted on Wednesday, January 29, 2003 - 6:23 pm:   

Did I mention that I think this is for a 348?

One note, the subframe to main chassis mount bushings (14 mm bolts toward the back) were changed in later spares production, if you're replacing an entire subframe, compare the new with the old and modify if necessary.
Rob Schermerhorn (Rexrcr)
Junior Member
Username: Rexrcr

Post Number: 178
Registered: 11-2002
Posted on Wednesday, January 29, 2003 - 6:18 pm:   

348, 348, 348, 348, 348

I've seen them in my sleep in '94 while we were updating suspension geometry for Challenge cars. The upper control arm inboard mount is lowered 25 mm (don't quote me on that spec) to lower rear roll center (centre for those in the UK) to improve drivability.
Charles Barton (Airbarton)
Junior Member
Username: Airbarton

Post Number: 143
Registered: 11-2002
Posted on Wednesday, January 29, 2003 - 2:12 pm:   

It does look quite a bit like the rear sub frame in my car. In fact it looks almost identical. I think its from a 348 as well!
Tom Bakowsky (Tbakowsky)
Junior Member
Username: Tbakowsky

Post Number: 180
Registered: 9-2002
Posted on Wednesday, January 29, 2003 - 11:56 am:   

That frame is out of a 348 Ferrari. Note the brackets for the air box position, and there are no transmission mount brakets for the six speed like the 355 has. That cross member is what the transmisson mount bolts to
Brian Keegan (4redude)
New member
Username: 4redude

Post Number: 24
Registered: 7-2002
Posted on Wednesday, January 29, 2003 - 11:05 am:   

It looks like the rear subframe for a 3 mount 348 or Mondial T. You can see the forward two motor mounting points, while the one in the center would be used to attach to the upper central bushing on the transaxle.
Reiner Kaiser (Reinerkaiser)
Junior Member
Username: Reinerkaiser

Post Number: 54
Registered: 2-2001
Posted on Wednesday, January 29, 2003 - 10:19 am:   

what did I win?
Reiner Kaiser (Reinerkaiser)
Junior Member
Username: Reinerkaiser

Post Number: 52
Registered: 2-2001
Posted on Wednesday, January 29, 2003 - 10:18 am:   

It's of course the 348 subframe.
Jerry W. (Tork1966)
Member
Username: Tork1966

Post Number: 395
Registered: 7-2001
Posted on Wednesday, January 29, 2003 - 10:12 am:   

Cradle for a large potted ficas?
Mitchel DeFrancis (4re308)
Member
Username: 4re308

Post Number: 758
Registered: 6-2001
Posted on Wednesday, January 29, 2003 - 10:05 am:   

I will bite. I think it is a front subframe of a 308/328. Me thinks.
Mitch Alsup (Mitch_alsup)
Member
Username: Mitch_alsup

Post Number: 319
Registered: 4-2002
Posted on Wednesday, January 29, 2003 - 10:02 am:   

It looks a lot like the subframe from a 355, but there are detail differences with respect to the suspension bracketry. For example, the 6-bolt connectors to the rest of the chassis are straignt on my 355 subframe. Then there is that bracket on the middle of the reinforcing section.

I will go out on a limb and say its from a TR or a BB.
DES (Sickspeed)
Intermediate Member
Username: Sickspeed

Post Number: 1670
Registered: 8-2002
Posted on Wednesday, January 29, 2003 - 8:09 am:   

Bruce, must you tell everyone what we do when not on FerrariChat...?
Ken (Allyn)
Member
Username: Allyn

Post Number: 687
Registered: 10-2001
Posted on Wednesday, January 29, 2003 - 7:40 am:   

Looks like a frame to hold a boat.
John A (Jarends)
Junior Member
Username: Jarends

Post Number: 187
Registered: 7-2001
Posted on Wednesday, January 29, 2003 - 7:10 am:   

Thanks Bruce, means a hell of a lot to us and you know it's the same.

Talk to you on Friday,
John
bruce wellington (Bws88tr)
Intermediate Member
Username: Bws88tr

Post Number: 1694
Registered: 4-2002
Posted on Wednesday, January 29, 2003 - 6:58 am:   

hey john

i hid it from the public and my friends...:-)

btw, you/and your family are always in mine/andreas heart all the time...
John A (Jarends)
Junior Member
Username: Jarends

Post Number: 186
Registered: 7-2001
Posted on Wednesday, January 29, 2003 - 6:55 am:   

Damn Bruce, I've been coming up to your house all this time and now I find out????
Figured I'd get on the board today since you reminded me last night I've not been on for awhile.
Enjoy,
bruce wellington (Bws88tr)
Intermediate Member
Username: Bws88tr

Post Number: 1692
Registered: 4-2002
Posted on Wednesday, January 29, 2003 - 6:04 am:   

jeff

thats easy...we use that when we play s&m and bondage games...you fit perfectley in the middle and bolt your legs perfectly on the mounts on both sides of the aparatus :-)
Greg Owens (Owens84qv)
Member
Username: Owens84qv

Post Number: 642
Registered: 10-2001
Posted on Wednesday, January 29, 2003 - 6:01 am:   

Rear subframe...355...TR?
Jeff Howe (Ferrari_uk)
Junior Member
Username: Ferrari_uk

Post Number: 56
Registered: 12-2002
Posted on Wednesday, January 29, 2003 - 4:53 am:   

Hi.

We are serious this time - can anyone tell us what this is for ? Found at the back in the corner, under the dust and cobwebs !

Thanks all.

Upload
Upload

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration