| Author |
Message |
Steve Magnusson (91tr)
| | Posted on Friday, August 10, 2001 - 8:56 am: | |
charles -- please be more specific -- what model 308(s) do you think have different front/back hub diameters? The stock front/back wheels are the same part on all of the 2-valve 308s which requires the same hub diameter (and the QVs wheels fit too so they are also 67 mm). Perhaps you are raising the issue about having adequate clearance for the other material inside the hub diameter (e.g., the projecting grease cap at the front) which is an important consideration -- but it is not related to the hub diameter dimension. |
charles claussen (Atlantaman)
| | Posted on Thursday, August 09, 2001 - 4:49 pm: | |
CAREFUL!!!!!!
hub diameters are different sizes for the front and the back on 308's!!!!!!
ps. 108mm is only .001" off of 4.25"--4.25" works fine. |
Steve Magnusson (91tr)
| | Posted on Tuesday, August 07, 2001 - 12:00 pm: | |
5 x 108 mm bolt circle
67 mm hub diameter
about +11 mm offset both front and rear
Use the "Keyword Search" for more info. |
Alex (Bxtech)
| | Posted on Tuesday, August 07, 2001 - 12:02 am: | |
I would like to find out the lug pattern - bolt circle measurement for a 308? 5 on ??mm? Thank you. |
|