| Author |
Message |
Ernesto (T88power)
Intermediate Member
Username: T88power
Post Number: 1313
Registered: 2-2001
| | Posted on Monday, March 10, 2003 - 10:46 am: | |
It would be very difficult to get that done because as Robert said the 360 grill has some curvature to it, versus the flat grill on the F50 and on the front of the 360.
Ernesto |
noel smith (Noel)
Junior Member
Username: Noel
Post Number: 71
Registered: 2-2003
| | Posted on Monday, March 10, 2003 - 10:34 am: | |
if you look at the back of the enzo the grill is a wider mesh, that's what i'm talking about. i just think it looks cooler. anyone with suggestions on how to do that on a 360? |
jake diamond (Rampante)
Junior Member
Username: Rampante
Post Number: 61
Registered: 4-2002
| | Posted on Thursday, March 06, 2003 - 9:43 pm: | |
<pre-modena...> i.e. F40 .
Jake |
Ernesto (T88power)
Intermediate Member
Username: T88power
Post Number: 1289
Registered: 2-2001
| | Posted on Thursday, March 06, 2003 - 6:42 pm: | |
The 355 uses the same type grill.
Ernesto |
jake diamond (Rampante)
Junior Member
Username: Rampante
Post Number: 60
Registered: 4-2002
| | Posted on Thursday, March 06, 2003 - 6:29 pm: | |
I agree with you, Noel, I've always thought the mesh should be a bit more "coarse". (As it was pre the Modena model), so you could see through it more. |
Robert (Rjklein4470)
Junior Member
Username: Rjklein4470
Post Number: 241
Registered: 3-2002
| | Posted on Thursday, March 06, 2003 - 4:42 pm: | |
The F50 is flat and has no shape. If you look at the 360 it needs to have some strength to hold the shape. |
noel smith (Noel)
Junior Member
Username: Noel
Post Number: 64
Registered: 2-2003
| | Posted on Thursday, March 06, 2003 - 4:36 pm: | |
Does anyone know of a wider mesh rear challenge grill? similar to the front challenge grills or the rear of a f50? i like the rear challenge grill but i wish that they were more see through. |