FerrariChat.com: 348 ride height revisited

348 ride height revisited Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » General Ferrari Discussion Archives » Archive through March 27, 2003 » 348 ride height revisited

« Previous Next »

Author

Message

Mitch Alsup (Mitch_alsup)
Member
Username: Mitch_alsup

Post Number: 399
Registered: 4-2002

Posted on Monday, March 17, 2003 - 9:51 am:

Warning F355 data:

Front: lower control arm; rear; nearest lowest chassis point: 4.7" -- The actual factory spec measurement is to the center of the lower rear pivot point bolt: 163 mm.

Rear: Lower control arm; rear; lower side to side brace: 5.2" -- actual factory spec measurement is to the center of the lower rear pivot bolt: 187 mm.

john beaucher (Spider348)
New member
Username: Spider348

Post Number: 47
Registered: 11-2002

Posted on Sunday, March 16, 2003 - 11:52 am:

Justin, I owed you a measurement to reference your 348 ride height.
Not the correct method but I measured to the uppermost point on the body wheel arch. The datum is generally taken at a defined suspension or frame point.
Good enough for reference.
Front 26.25"
Rear 28"
Let me know if yours is different. The prior owner said the ride height was lowered 1". Like to verify if this is correct.
Sorry for the delay. Today was the 1st time in months I could get the Ferrari out of the garage due to ice etc.

Administration