| Author |
Message |
Angelo H. Oliva (Blicima_355)
New member
Username: Blicima_355
Post Number: 19
Registered: 8-2002
| | Posted on Saturday, March 22, 2003 - 11:54 pm: | |
Thanks for that web address Mike.... Very helpful..
Angelo |
Mike Charness (Mcharness)
Member
Username: Mcharness
Post Number: 356
Registered: 8-2002
| | Posted on Saturday, March 22, 2003 - 6:35 am: | |
Angelo, the mount on the 355 should be pretty much the same as the 308/328/348, just check the dimensions between the seat rail bolts. See www.TradeTutor.com/raceprep/ for a common installation.
|
Martin - Cavallino Motors (Miami348ts)
Advanced Member
Username: Miami348ts
Post Number: 4065
Registered: 5-2001
| | Posted on Saturday, March 22, 2003 - 6:14 am: | |
Yes, you can do that yourself.
Find a good position in the passenger side foot well. Use non-rust screws, short to go into sheet metal. I have not yet looked for my position. Mine is still flapping around. Will do that today at the show.
Martin
|
Angelo H. Oliva (Blicima_355)
New member
Username: Blicima_355
Post Number: 18
Registered: 8-2002
| | Posted on Saturday, March 22, 2003 - 12:08 am: | |
Is it a do it yourself kind of job??? What kind of hardware is used to mount it to the floor board. How about some "do's and don't"
Thanks.... |