| Author | Message | ||
| JohnR. (Rivee)
Junior Member Username: Rivee Post Number: 202 Registered: 1-2002 |
What about foam inserts along with the screen for air cleaning for a 308? | ||
| Philip Airey (Pma1010)
Junior Member Username: Pma1010 Post Number: 231 Registered: 7-2002 |
Superformance in the UK sells the siamesed v stacks with the mesh screens like those pictured by Mark Philip | ||
| Mark Lindman (Markl)
New member Username: Markl Post Number: 15 Registered: 12-2002 |
Bill, I've had no luck either. Thought Pegasus had the goods, but what I got in the mail today was not even close. | ||
| William Badurski (Billb)
Junior Member Username: Billb Post Number: 173 Registered: 6-2001 |
The 40 DCN stacks for Daytona measure 2.100" OD, and are siamesed together in pairs. Did not see anything "off-the-shelf" like this at the sites listed in this thread, but it would be worth a call to Inglese to see what they might come up with. | ||
| Lee Sanders (Lsand007)
New member Username: Lsand007 Post Number: 42 Registered: 3-2002 |
I got my stacks, rings and screens from Inglese as noted below. I replaced the stacks on a 512BB and they work great. I looked at all the rest and they were economical and readily available off the shelf. Call Dan there, he knows Ferraris pretty well.  | ||
| Craig Dewey (Craigfl)
Member Username: Craigfl Post Number: 591 Registered: 1-2001 |
How about here: http://www.arlenness.com/catalog/HDCat/motors_exhaust/carbs_weber.html# http://www.discountmcparts.com/cci/SECT08.pdf http://www.inglese.com/inglese_products.htm | ||
| William Badurski (Billb)
Junior Member Username: Billb Post Number: 167 Registered: 6-2001 |
Mark, Checked the Pegasus site, but found nothing "off-the-shelf" as to what you need. Screen material listed could be used to fabricate. Mine are semi-hemi shaped and soldered to brass rings that fit into the stack at the top. Epoxy holds them in-place. I'll try a post in FML to see what's out there. | ||
| "The Don" (Mlemus)
Advanced Member Username: Mlemus Post Number: 4465 Registered: 8-2002 |
http://www.pegasusautoracing.com/ Matt | ||
| Mark Lindman (Markl)
New member Username: Markl Post Number: 14 Registered: 12-2002 |
Thanks guys. Have a post out Jeff to see what he has. | ||
| Frank K Lipinski (Kaz)
Member Username: Kaz Post Number: 278 Registered: 11-2002 |
Agree with Tom - btw - made me think of something..I was at a small independent shop the other day and the car he was working on had the same stacks. For a temp fix, the owner cut panty hose over the stacks. Makes for a good excuse if your wife or g/f find a pair of used stockings behind the seat!  | ||
| TomD (Tifosi)
Advanced Member Username: Tifosi Post Number: 3526 Registered: 9-2001 |
I am sure Jeff in the Uk prob has them | ||
| Mark Lindman (Markl)
New member Username: Markl Post Number: 13 Registered: 12-2002 |
Have been trying to locate some sceens for my velocity stacks. Anyone know of a source for these or do I just have to have some fabricated? Mark  |