Need help installing hose clamps on a... Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » General Ferrari Discussion Archives » Archive through May 13, 2003 » Need help installing hose clamps on airbox of 308QV « Previous Next »

Author Message
Vernon Hill (Vwh3rd)
Junior Member
Username: Vwh3rd

Post Number: 135
Registered: 1-2003
Posted on Thursday, May 08, 2003 - 2:01 pm:   

Ken

You are more than welcome to bring the better-half and golf is certainly not required.
Ken Ross (Kdross)
Member
Username: Kdross

Post Number: 346
Registered: 2-2002
Posted on Thursday, May 08, 2003 - 1:42 pm:   

Vernon,

I will probably come down. My finals end tonight at 10 PM, so I will be a free man until August when school starts again. My Ferrari is getting some last minute touches for the Reading Concours (May 18th), so I will not have it for the weekend. I will dust off the Rolls and bring it down to the course. Email me your cell # so that I can call you if I cannot locate anyone at the course. FWI, last time I played golf I got a 96, but that was on a 9 hole course. As such, I will probably take a pass on playing golf since my clubs have been in storage for 10 years and I really suck at golf. Is this a function where we can bring our wife's/girlfriends, or a guys night out without the girls?

Ken
[email protected]
Vernon Hill (Vwh3rd)
Junior Member
Username: Vwh3rd

Post Number: 132
Registered: 1-2003
Posted on Thursday, May 08, 2003 - 1:29 pm:   

Hey ken

Are you planning on coming down for the A.C. get together?
Ken Ross (Kdross)
Member
Username: Kdross

Post Number: 344
Registered: 2-2002
Posted on Thursday, May 08, 2003 - 1:21 pm:   

I recently noticed that I am missing a hose clamp on the hose to the airbox on my 308QV. Upon closer examination, the one remaining hose clamp was not correct to the car. I have since obtained the proper two hose clamps for the car, but I cannot figure out how to install them. How do I install these clamps? Do I just feed the metal leader through the opening on the clamp and turn the "key" to secure it? Also, the metal leader appears to be very long. What do I do with the extra material of the metal leader? Do I somehow bend it under the clamp, or just cut it? Any input would be appreciated. Pictures are encouraged. Thanks.

Ken

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration