| Author |
Message |
Paul Hill (348paul)
Member
Username: 348paul
Post Number: 280
Registered: 12-2002
| | Posted on Monday, June 02, 2003 - 3:40 pm: | |
Mark - I will contact Phil - Thanks
Just to update this thread
We are running batches of standard length wheel bolts. The range so far is
246 Dino
308
328 Non ABS
328 ABS
348
355
Testarossa
400
They are all priced at �5.00 each plus shipping.
These are made by us under strict quality control and we also have had MIRA do tensile destruction tests to make 100% sure that these conform to the original specification.
All bolts will be chrome plated and have a polished domed head.
They are not on our website at the moment, but will be when we start shipping in the next 2 weeks.
Paul
www.hill-engineering.co.uk
[email protected]
|
Mark Collins (Markcollins)
Junior Member
Username: Markcollins
Post Number: 228
Registered: 7-2002
| | Posted on Saturday, May 31, 2003 - 6:56 am: | |
Paul
at �5 I'm sure you'll sell loads, have you thought of advertising them in the FOC Magazine? I bought from QV London, if you're not already supplying them I'm sure Phil would be interested |
Paul Hill (348paul)
Member
Username: 348paul
Post Number: 274
Registered: 12-2002
| | Posted on Saturday, May 31, 2003 - 2:30 am: | |
Alan,
You have mail.
I forgot to mention that we are running the standard bolts for the 348 & 355 as well.
Paul |
allan fiedler (Allanlambo)
Member
Username: Allanlambo
Post Number: 566
Registered: 6-2002
| | Posted on Friday, May 30, 2003 - 2:33 pm: | |
Hey Paul, i still want the rear spacers for my 355, can you email me a price? |
Paul Hill (348paul)
Member
Username: 348paul
Post Number: 272
Registered: 12-2002
| | Posted on Friday, May 30, 2003 - 2:31 pm: | |
Mark,
All of our bolts work out at �5.00 each and are to the exact spec of the original bolt, including a mirror finish on the dome head.
Where did you get the ones you bought from?
Thanks
Paul
|
Mark Collins (Markcollins)
Junior Member
Username: Markcollins
Post Number: 226
Registered: 7-2002
| | Posted on Friday, May 30, 2003 - 2:19 pm: | |
Paul
what price?, Ferrari charge around �20 each for 355 bolts and IIRC �26 for 328's. I managed to get some 355 for �10 each the other day so if they're in that price range I guess there would be a good market |
Paul Hill (348paul)
Member
Username: 348paul
Post Number: 270
Registered: 12-2002
| | Posted on Friday, May 30, 2003 - 1:12 pm: | |
Wheel Bolts
I have had quite a few people email me asking if we can supply standard wheel bolts (as well as the ones that we supply for our spacers.) This is mainly due to the fact that the chrome plating has started to flake away.
We are currently running a batch of out bolts at the moment and are including a few standard length sets for the 400.
Are there any other wheel bolt requirements out there?
Thanks in advance
Paul
www.hill-engineering.co.uk
[email protected]
|