| Author |
Message |
Crawford White (Crawford)
Junior Member
Username: Crawford
Post Number: 76
Registered: 3-2003
| | Posted on Monday, June 09, 2003 - 9:10 pm: | |
Thanks, Brian. Would love to see the bulletin. Here's my fax #:
615-333-8965 |
Brian Keegan (4redude)
Junior Member
Username: 4redude
Post Number: 118
Registered: 7-2002
| | Posted on Monday, June 09, 2003 - 9:04 pm: | |
There is a factory service bulletin on how to "re-calibrate" these switches used in 328's and 412's.
It is bulletin 80-36 dated 2/13/89. I can fax it to you if you provide a number. I am not sure this will cure your problem, but it couldn't hurt to try. Please contact me privately or call 408-364-0881.
Brian |
Crawford White (Crawford)
Junior Member
Username: Crawford
Post Number: 66
Registered: 3-2003
| | Posted on Friday, June 06, 2003 - 3:00 pm: | |
The vent direction LED switch on the drivers side of my 86 328 is not working. I can't get any 'blips' to appear and I don't hear the vent director moving from under the dash..
I checked the archives, and took out the switch and sprayed some contact cleaner on it. No luck.
My other controls all work fine - just the one LED is not functioning and the fan vent does not adjust. I'm not crazy about spending $850 to replace the switch; could it be something else - possibly the motor that redirects the vents?
I do hear a faint click from under the left side of the dash when I press down the rocker switch... |