Author |
Message |
Paul Hill (348paul)
Member Username: 348paul
Post Number: 326 Registered: 12-2002
| Posted on Saturday, July 19, 2003 - 7:59 pm: | |
No problem David - Thank you. For the record the 348 can be filled with any colour paint (rather than just red as I stated below) or left plain (unpainted). One other variation is that the 348 can be omitted from the footplate with just the matrix of holes over the whole part. Thanks for all the interest on these, Paul
|
David C. (Worth_it)
Junior Member Username: Worth_it
Post Number: 159 Registered: 10-2002
| Posted on Thursday, July 17, 2003 - 7:08 am: | |
Justin, I also drive a 348 Spider. The photo posted is from that car. Pedals fit great and installation was straight forward. Like you, I have done a few minor up-grades see the following thread.http://www.ferrarichat.com/discus/messages/21/281939.html?1058397724 Paul, Thanks for the inoformation. Look forward to receiving it.
|
Paul Hill (348paul)
Member Username: 348paul
Post Number: 323 Registered: 12-2002
| Posted on Thursday, July 17, 2003 - 6:28 am: | |
Justin, These will fit the spider as well - I supply these with various methods of fixing to choose from. David & DrS - Yours have been dispatched Thanks guys Paul
|
J R K (Kenyon)
Member Username: Kenyon
Post Number: 508 Registered: 10-2002
| Posted on Monday, July 14, 2003 - 7:26 am: | |
Paul, Will it fit a 348 Spyder LHD ? Do you drill the existing metal plate under the rubber pad and fix the new footrest to it, in this way ? Thanks for your help on this matter. Regards, Justin. |
J R K (Kenyon)
Member Username: Kenyon
Post Number: 505 Registered: 10-2002
| Posted on Monday, July 14, 2003 - 4:25 am: | |
Paul, The Passenger Footrest looks great with 348 engraved of it. How does the footrest fit, bolted down,adesive or just laid on ? Will this footrest fit 348 Spyder LHD which I have ?? Regards, Justin Kenyon |
Drstranglove (Drstranglove)
Member Username: Drstranglove
Post Number: 672 Registered: 4-2003
| Posted on Sunday, July 13, 2003 - 5:39 pm: | |
Nice Paul!!!!! Good Job David!!! DrS |
David C. (Worth_it)
Junior Member Username: Worth_it
Post Number: 151 Registered: 10-2002
| Posted on Saturday, July 12, 2003 - 1:56 pm: | |
Todd, Here is a photo of the installed product. Remember I am not the best with tools.
Before
 |
David C. (Worth_it)
Junior Member Username: Worth_it
Post Number: 148 Registered: 10-2002
| Posted on Friday, July 11, 2003 - 7:50 pm: | |
Todd, Sorry for not answering your question sooner. Installation was easy, even for me. I am not a wrench turner. Just a power drill and about 90 minutes for all 4 pedals. I can't wait fo the passenger side piece to arrive. I am sure you will like the look. The price quote is approx. $80.00 USD, I think. Paul, Please e-mail me again as I have missed many messages today. Thanks |
todd montandon (Sllade)
Junior Member Username: Sllade
Post Number: 86 Registered: 7-2003
| Posted on Friday, July 11, 2003 - 6:19 pm: | |
paul how much is that in us currency .Todd |
Paul Hill (348paul)
Member Username: 348paul
Post Number: 318 Registered: 12-2002
| Posted on Friday, July 11, 2003 - 2:55 pm: | |
Justin, (I have attached 2 new pictures) The footplate is aluminium with the �348� machined in approximately 1mm deep and in filled with red paint (if required). The price works out to �50.00 + shipping (+VAT if within the EU) David & DrS I will send you a quick email regarding the footrest. Thanks for all of the positive comments guys! - Truly appreciated. Paul
|
J R K (Kenyon)
Member Username: Kenyon
Post Number: 502 Registered: 10-2002
| Posted on Friday, July 11, 2003 - 6:00 am: | |
Paul, Is the footrest in alu with the 348 logo in red or carved into the alu ? How much are they are for the Uk delivery. |
Paul Hill (348paul)
Member Username: 348paul
Post Number: 317 Registered: 12-2002
| Posted on Friday, July 11, 2003 - 5:37 am: | |
Todd, Thanks for the order - I have attached the rendering of the 348-passenger footrest. These are now available as of today. Regarding the fitting of the pedals - They are supplied with a fully illustrated fitting guide and are quite easy to fit providing that you work to the instructions! If you need anymore help, please feel free to contact me. Paul www.hill-engineering.co.uk Ferrari Chat Sponser
|
Rob Baylor (Baylor308)
Junior Member Username: Baylor308
Post Number: 54 Registered: 11-2002
| Posted on Friday, July 11, 2003 - 1:05 am: | |
I have not received it. Did you send it to [email protected]? Rob |
todd montandon (Sllade)
Junior Member Username: Sllade
Post Number: 85 Registered: 7-2003
| Posted on Friday, July 11, 2003 - 12:59 am: | |
got it i emailed you back not sure if you will get it though? |
Rob Baylor (Baylor308)
Junior Member Username: Baylor308
Post Number: 53 Registered: 11-2002
| Posted on Friday, July 11, 2003 - 12:53 am: | |
Todd, You have an e-mail waiting. Rob |
todd montandon (Sllade)
Junior Member Username: Sllade
Post Number: 84 Registered: 7-2003
| Posted on Friday, July 11, 2003 - 12:48 am: | |
rob that will fit a 91 348 ? how much? Todd |
Rob Baylor (Baylor308)
Junior Member Username: Baylor308
Post Number: 52 Registered: 11-2002
| Posted on Friday, July 11, 2003 - 12:41 am: | |
Here is a photo of my passenger side footrest. All of my pedals atr available immediatly.
Rob Baylor www.ultimatepedals.com |
todd montandon (Sllade)
Junior Member Username: Sllade
Post Number: 64 Registered: 7-2003
| Posted on Thursday, July 10, 2003 - 2:54 pm: | |
dave r they easy to install? |
todd montandon (Sllade)
Junior Member Username: Sllade
Post Number: 60 Registered: 7-2003
| Posted on Thursday, July 10, 2003 - 2:32 pm: | |
dave does he have the pass side footresat for the 91 348? todd. ps i did indeed order them from paul last night |
David C. (Worth_it)
Junior Member Username: Worth_it
Post Number: 146 Registered: 10-2002
| Posted on Thursday, July 10, 2003 - 12:10 pm: | |
Buy the Hill product - you wll not be disappointed in the quality or the looks. I am currently waiting on delivery of his new passenger side foot plate. Can't wait to install. Already installed the 4 drivers side pedals ( yes 4, includes the dead pedal )
|
Jeff Edison (Euro308guy)
Member Username: Euro308guy
Post Number: 394 Registered: 7-2002
| Posted on Thursday, July 10, 2003 - 11:40 am: | |
Todd, The Hill pedals are just fantastic. I have them in my 348 Twin Turbo car. I understand everyone has their own taste, so I would never fault anyone for "doing their own thing", BUT I've got to tell you, evryone who's seen my pedals has been impressed. I fully recommend them, without reservation. Contact Paul for this. J |
Dave Penhale (Dapper)
Member Username: Dapper
Post Number: 735 Registered: 4-2002
| Posted on Thursday, July 10, 2003 - 8:49 am: | |
Ugh, they look disgusting, I'll stick with my hill-engineering ones thanks very much. |
J R K (Kenyon)
Member Username: Kenyon
Post Number: 486 Registered: 10-2002
| Posted on Thursday, July 10, 2003 - 12:55 am: | |
www.momo.it |
neal (95spiderneal)
Junior Member Username: 95spiderneal
Post Number: 203 Registered: 3-2002
| Posted on Wednesday, July 09, 2003 - 9:12 pm: | |
i just got mine from www.ultimatepedals.com. highly recommend them |
Paul Hill (348paul)
Member Username: 348paul
Post Number: 315 Registered: 12-2002
| Posted on Wednesday, July 09, 2003 - 4:02 pm: | |
Todd, The Momo pedals look colourful and interesting! - I am not sure what they are like for grip & fit though. I have supplied many people here on f-chat with the Pedals that my company makes which although are not quite as colourful as the Momo ones, they do provide excellent grip even in the wet and are similar to the pedals that you would see on a 348 Challenge. Paul www.hill-engineering.co.uk Ferrari Chat Sponsor
|
todd montandon (Sllade)
New member Username: Sllade
Post Number: 33 Registered: 7-2003
| Posted on Wednesday, July 09, 2003 - 1:32 pm: | |
what do you guys think of the momo pedals for the 348 are they much better to use or is it mainly for looks |