Author |
Message |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 162 Registered: 3-2002
| Posted on Sunday, July 20, 2003 - 11:03 pm: | |
John. I replaced every piece of carpeting including the panel behind the seats. My installer charged me for ten hours work although I suspect that it took longer. The carpet from GAHH did not include the rubber foot pieces so the installer took them off the old set which seemed to show no wear at all perhaps becuase of floor mats. Let me know if you need some more information. |
john roberts (Jr328gtb)
New member Username: Jr328gtb
Post Number: 50 Registered: 5-2003
| Posted on Sunday, July 20, 2003 - 8:32 pm: | |
russ looks great - could you send me details on what pieces you ordered etc...ie - did you replace all the carpet including the vertical portion behind the seats thanks |
dave handa (Davehanda)
Intermediate Member Username: Davehanda
Post Number: 1340 Registered: 5-2001
| Posted on Sunday, July 20, 2003 - 3:51 pm: | |
Very nicely done Russ! |
Carmine Nicoletta (Ncarmine)
Junior Member Username: Ncarmine
Post Number: 105 Registered: 6-2002
| Posted on Saturday, July 19, 2003 - 10:23 pm: | |
Russ, please send me some pictures as well. ncarmine at swbell dot net. Thanks |
BobD (Bobd)
Intermediate Member Username: Bobd
Post Number: 1376 Registered: 3-2001
| Posted on Saturday, July 19, 2003 - 10:02 pm: | |
From Russ... looks GREAT... like brand new!
 |
BobD (Bobd)
Intermediate Member Username: Bobd
Post Number: 1375 Registered: 3-2001
| Posted on Saturday, July 19, 2003 - 5:33 pm: | |
Russ, send a couple to me and let me see if I can resize and post them. Make sure they are .jpg files. [email protected] Bob |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 161 Registered: 3-2002
| Posted on Saturday, July 19, 2003 - 4:48 pm: | |
Sorry but I cannot make this work. I took pictures at the lowest resolution on my digital camera and then cropped them as much as possible. Still I get the message that says I must drop the resolution to 640 by 640. Don't know what else to do. I will try and send pics to John Roberts by e-mail and will send to anyone else who wants the pics. |
BobD (Bobd)
Intermediate Member Username: Bobd
Post Number: 1374 Registered: 3-2001
| Posted on Saturday, July 19, 2003 - 3:11 pm: | |
.pza file.
 |
Jim E (Jimpo1)
Intermediate Member Username: Jimpo1
Post Number: 2115 Registered: 7-2001
| Posted on Saturday, July 19, 2003 - 2:36 pm: | |
BTW, what is a .pza file? |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 160 Registered: 3-2002
| Posted on Saturday, July 19, 2003 - 10:08 am: | |
I am trying guys. Bear with me. |
Rob Lay (Rob328gts)
Board Administrator Username: Rob328gts
Post Number: 5633 Registered: 12-2000
| Posted on Saturday, July 19, 2003 - 10:03 am: | |
Has to be 640 by 480 or less and be jpg or gif format. |
Jim E (Jimpo1)
Intermediate Member Username: Jimpo1
Post Number: 2113 Registered: 7-2001
| Posted on Saturday, July 19, 2003 - 10:01 am: | |
Russ, try to resize the pic to 640x480. |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 159 Registered: 3-2002
| Posted on Friday, July 18, 2003 - 8:52 pm: | |
I have had a lot of trouble posting this. Says the file is too large. I will see if this works. If not I will keep trying. Perhaps I have to reduce the resolution on my camera.
|
Roger Cederholm (Web_man_1)
New member Username: Web_man_1
Post Number: 1 Registered: 6-2003
| Posted on Friday, July 18, 2003 - 2:05 pm: | |
please ignore my mistake. |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 157 Registered: 3-2002
| Posted on Friday, July 18, 2003 - 12:38 pm: | |
John. Have been away for a week. Will get pics out this weekend. |
john roberts (Jr328gtb)
New member Username: Jr328gtb
Post Number: 43 Registered: 5-2003
| Posted on Friday, July 18, 2003 - 11:05 am: | |
russ - any pics yet?? |
Dave Goldman (Dave328)
Junior Member Username: Dave328
Post Number: 227 Registered: 11-2002
| Posted on Saturday, July 12, 2003 - 6:57 pm: | |
Ahhh, thanks! Dave |
Randall (Randall)
Member Username: Randall
Post Number: 590 Registered: 1-2003
| Posted on Saturday, July 12, 2003 - 5:15 pm: | |
GAHH- Good website for interior carpet and leather. Possibly the lowest pricest. http://www.gahh.com/ Another site is: http://worlduph.com/ferrari.htm But I don't know anything about their prices or service. |
Dave Goldman (Dave328)
Junior Member Username: Dave328
Post Number: 226 Registered: 11-2002
| Posted on Saturday, July 12, 2003 - 5:03 pm: | |
Forgive my ignorance,but, what is GAHH? Thanks, Dave |
dave handa (Davehanda)
Intermediate Member Username: Davehanda
Post Number: 1221 Registered: 5-2001
| Posted on Saturday, July 12, 2003 - 1:28 pm: | |
Okay, thanks. Didn't realize you were in the "Inland NW"... :-) Was just in Coeur d'Alene on business a few weeks ago...will not be out that way again for a month or two. Man, it was "Africa Hot" too! |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 154 Registered: 3-2002
| Posted on Saturday, July 12, 2003 - 11:58 am: | |
Dave. Shop was the Recovery Room in Coeur d'Alene. 208 667 4916-ask for Mike the owner. Not sure what you mean by serging. However the edge trim on the door panels and a couple other places was in leather the same color as the seats. Trim on other parts was gray vinyl as in the original. |
dave handa (Davehanda)
Intermediate Member Username: Davehanda
Post Number: 1219 Registered: 5-2001
| Posted on Saturday, July 12, 2003 - 11:51 am: | |
Russ, Was the shop able to copy the serging on the edges? Well, I guess I just need pictures :-) Since it sounds like you live in the NW perhaps you will come to a local FCA event and we can see it? BTW, what's the name of the shop? |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 153 Registered: 3-2002
| Posted on Saturday, July 12, 2003 - 11:47 am: | |
Jim. The install was $400 and the carpets were purchased by the installer who quoted me the retail price from GAHH-$642 as I recall. He had the car for two days and thought that it would take about 10 hours in total time. He also put some velcro strips on the bottom of the floor carpet and the floor to help hold them in place. This was about half the cost quoted by the Ferrari dealer in Seattle who said that I would have to leave the car for two weeks. |
Jim E (Jimpo1)
Intermediate Member Username: Jimpo1
Post Number: 2069 Registered: 7-2001
| Posted on Saturday, July 12, 2003 - 10:08 am: | |
Can I ask, how much was the install? I've already priced the carpet for my 328. |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 152 Registered: 3-2002
| Posted on Friday, July 11, 2003 - 10:05 pm: | |
It is a 1988. Will try some pics this weekend with my new digital camera. |
john roberts (Jr328gtb)
New member Username: Jr328gtb
Post Number: 41 Registered: 5-2003
| Posted on Friday, July 11, 2003 - 9:54 pm: | |
how about some pics |
Paul Wehmer (Pwehmer)
Junior Member Username: Pwehmer
Post Number: 176 Registered: 10-2002
| Posted on Friday, July 11, 2003 - 8:49 pm: | |
What year is it? |
Russ F (Russf)
Junior Member Username: Russf
Post Number: 151 Registered: 3-2002
| Posted on Friday, July 11, 2003 - 8:00 pm: | |
I just had the carpeting replaced in my Rosso Corso 328 with Tan interior. The car had spent most of its life in Phoenix and the original carpet was faded. I examined a lot of color samples and settled on Palomino which I bought from GAHH. It was a perfect match to the original and the installer in Coeur d'Alen Idaho did a terrific job. |