Shield Location for 360

Log Out | Topics | Search Moderators | Edit Profile

Author Message acw (Acw) New member Username: Acw Post Number: 19 Registered: 2-2002 Posted on Wednesday, May 01, 2002 - 10:17 am:    When looking at the driver side, the top right corner of the shield is 72mm from the door (excluding door gap). The bottom edge of the shield is 84mm from the door (again, excluding door gap). Sorry I only have a metric ruler (: I believe that 1 inch is 25.4 mm ACW ELI (Titanium360) New member Username: Titanium360 Post Number: 9 Registered: 4-2002 Posted on Wednesday, May 01, 2002 - 9:43 am:    Dave thanks anyway. Eli Dave Mills (360dave) New member Username: 360dave Post Number: 44 Registered: 1-2002 Posted on Wednesday, May 01, 2002 - 9:19 am:    Sorry Eli, unfortunately I can't. That's not my car, I either took or found that picture, can't rememberhow it ended up on my hard drive... Dave ELI (Titanium360) New member Username: Titanium360 Post Number: 8 Registered: 4-2002 Posted on Wednesday, May 01, 2002 - 9:05 am:    Martin, Yes they are the raised ones and they look great. I paid $360.00 for the set. I hope i got a good deal. Dave, Would you mind letting me know how many inches is the shield away from the door. By the way thanks alot for the picture. Eli Dave Mills (360dave) New member Username: 360dave Post Number: 43 Registered: 1-2002 Posted on Wednesday, May 01, 2002 - 12:36 am:    This may help... Dave Robert Jude Klein (Rjklein4470) Junior Member Username: Rjklein4470 Post Number: 77 Registered: 3-2002 Posted on Tuesday, April 30, 2002 - 11:25 pm:    how much are the enamel shields Martin (Miami348ts) Intermediate Member Username: Miami348ts Post Number: 2049 Registered: 5-2001 Posted on Tuesday, April 30, 2002 - 4:24 pm:    Eli, I assume these are the raised ones that have like a fill so they are 3D, right. Same what I have on my car. These are great. Hope you got a good deal! Which 360 owner with factory shields can e-mail a picture of them to our friend Eli here? <looking> bruce wellington (Bws88tr) Junior Member Username: Bws88tr Post Number: 182 Registered: 4-2002 Posted on Tuesday, April 30, 2002 - 11:59 am:    ADHESIVE MIGHT BE WORN, STICK TO VINYL SHIELDS, REALLY THEY LOOK ORIGINAL AND NICE,, I HAVE THEM.. ELI (Titanium360) New member Username: Titanium360 Post Number: 7 Registered: 4-2002 Posted on Tuesday, April 30, 2002 - 11:54 am:    Martin, I am buying the shields from someone off the chat line. He has them advertised on the ferrariad secion. No i will not have them recessed . the ones he is selling me has adhesive on the back and i think they are as close to the original as it gets. I think they look better than the sticker shield. Obviously you pay much more as well. Martin (Miami348ts) Intermediate Member Username: Miami348ts Post Number: 2031 Registered: 5-2001 Posted on Tuesday, April 30, 2002 - 11:24 am:    ELI, will you recess them as well? Repaint the fender afterwards? bruce wellington (Bws88tr) Junior Member Username: Bws88tr Post Number: 176 Registered: 4-2002 Posted on Tuesday, April 30, 2002 - 10:23 am:    WHY ENAMEL? I HAVE VINYL S/F SHIELDS FOR MY T.R. AND THEY LOOK GREAT, NEVER HAVE FALLEN OFF AND COST 9.00 EACH?? JUST WONDERING?? BRUCE Frank Parker (Parkerfe) Member Username: Parkerfe Post Number: 827 Registered: 9-2001 Posted on Tuesday, April 30, 2002 - 10:16 am:    Call Beau Pirkle at 770.939.6982. He's been installing shields since the 1970s. ELI (Titanium360) New member Username: Titanium360 Post Number: 6 Registered: 4-2002 Posted on Monday, April 29, 2002 - 2:11 pm:    Does anyone know the exact location for the shield on the 360's . i am puting on a enamel shield on my 360 and wanted to know if anyone has any idea of the exact location.