| Author |
Message |
Heiko (Hgparts)
Junior Member
Username: Hgparts
Post Number: 204
Registered: 3-2003
| | Posted on Friday, September 26, 2003 - 5:47 pm: | |
yes omar its not on my site but you can trust me it�s this number just buy it from sodacom�s he has it in stock. the 512TR/M they have the same gasket like the 328 on the cats.
hgparts
sponsor of ferrarichat
email: [email protected]
Webshop: http://stores.andale.com/hgparts |
Omar (Auraraptor)
Intermediate Member
Username: Auraraptor
Post Number: 1022
Registered: 9-2002
| | Posted on Friday, September 26, 2003 - 5:20 pm: | |
Heiko, that part is not listed on your site, and according to Sodacoms its for the 512M. oh boy.... |
dave handa (Davehanda)
Intermediate Member
Username: Davehanda
Post Number: 1919
Registered: 5-2001
| | Posted on Thursday, September 25, 2003 - 9:39 pm: | |
Good point Gary, $3 versus $20 or more... |
Gary Reed (Gary_reed)
Junior Member
Username: Gary_reed
Post Number: 197
Registered: 2-2002
| | Posted on Thursday, September 25, 2003 - 8:55 pm: | |
You could always take your exhaust pieces to your local Midas or any exhaust shop in your town. They can hook you up gaskets that will work just fine for much less $$ than a Ferrari dealer or F-parts place will charge.
That's what I did. |
Heiko (Hgparts)
Junior Member
Username: Hgparts
Post Number: 202
Registered: 3-2003
| | Posted on Thursday, September 25, 2003 - 8:00 pm: | |
hi omar
the partnumber you need is 154985 for both in front the test pipe and after so you need 2 of them
hgparts
sponsor of ferrarichat
email: [email protected]
Webshop: http://stores.andale.com/hgparts |
Omar (Auraraptor)
Intermediate Member
Username: Auraraptor
Post Number: 1019
Registered: 9-2002
| | Posted on Thursday, September 25, 2003 - 7:52 pm: | |
Thanks Dave...yea I recall it having such. The question becomes, which gaskets do I need ecactly? As Sodacoms has dozens of gaskets termed "exhaust gaskets." |
dave handa (Davehanda)
Intermediate Member
Username: Davehanda
Post Number: 1913
Registered: 5-2001
| | Posted on Thursday, September 25, 2003 - 2:35 pm: | |
Make sure the test pipe has the bit of pipe coming out past the flange on one end, like the original cat...if not, the exhaust gases will be directly contacting the asbestos gasket and will burn through in a few months. If it does not, just make sure to get a sintered metal gasket instead and you will be "good to go". Can you post a pic of the pipe? |
Omar (Auraraptor)
Intermediate Member
Username: Auraraptor
Post Number: 1018
Registered: 9-2002
| | Posted on Thursday, September 25, 2003 - 2:25 pm: | |
I have a tubi and a straight pipe waiting to be installed...I need the gaskets though..where to buy? I looked at Sodacoms..but there were to many and I dont know which I need exactly. Again its the gaskets for the tubi exhaust and a set of nick forza straight pipes. |