| Author |
Message |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 2133
Registered: 1-2001
| | Posted on Saturday, September 27, 2003 - 10:48 am: | |
In case you're trying some on-line searches, it's usually spelled "bung". |
philip (Fanatic1)
Member
Username: Fanatic1
Post Number: 489
Registered: 2-2003
| | Posted on Saturday, September 27, 2003 - 7:49 am: | |
Ahhhhhh.......thank you, it's all making sense now. |
Mister Jones (Davey_jones)
Junior Member
Username: Davey_jones
Post Number: 142
Registered: 9-2002
| | Posted on Saturday, September 27, 2003 - 7:47 am: | |
In other words it's a long "nut" ..... |
Henryk (Henryk)
Intermediate Member
Username: Henryk
Post Number: 1209
Registered: 8-2001
| | Posted on Saturday, September 27, 2003 - 7:40 am: | |
Phillip: A bunge is a female threaded thick walled tube, that the O2 sensor screws into, just like into the cat. I buy these at the local exhaust shop. It is about an inch long. |
Mister Jones (Davey_jones)
Junior Member
Username: Davey_jones
Post Number: 141
Registered: 9-2002
| | Posted on Saturday, September 27, 2003 - 7:31 am: | |
If you are talking about the 348, there are 2 sensors on each CAT. The O2 Sensor
is closer to the cabin and the thermocoupler is towards the rear of the car.
I zip tied the thermocouplers to the frame (not needed now).
The test pipes I bought from a board member had the O2 sensor
screw holes pre-drilled. All is good
dave
indianapolis |
philip (Fanatic1)
Member
Username: Fanatic1
Post Number: 488
Registered: 2-2003
| | Posted on Saturday, September 27, 2003 - 7:29 am: | |
Thanks Henry.......what's a bunge....something to do with the socket???
Sorry!
|
Henryk (Henryk)
Intermediate Member
Username: Henryk
Post Number: 1208
Registered: 8-2001
| | Posted on Saturday, September 27, 2003 - 7:22 am: | |
Phillip: I have made my own straight pipes for my TR. I drilled a hole and welded a bunge for the O2 sensor......works great!!!!!
BTW: I am making 2 more sets for the TR, if anyone is interested. |
William H (Countachxx)
Advanced Member
Username: Countachxx
Post Number: 3182
Registered: 2-2001
| | Posted on Saturday, September 27, 2003 - 7:11 am: | |
On my 512TR race car with straight pipes my mechanics made holes for the sensor probes where the original holes on the cats where |
philip (Fanatic1)
Member
Username: Fanatic1
Post Number: 485
Registered: 2-2003
| | Posted on Saturday, September 27, 2003 - 6:29 am: | |
The O2 Sensor is on the Cat's right? If you take off the cats and put in test pipes...straight pipes....where does the O2 Sensor go? It doesn't plug into the straight pipes does it? Sorry, haven't actually seen straight pipes in person.....this may be a silly question |