| Author |
Message |
Michael Palilonis (Mpalilonis)
New member
Username: Mpalilonis
Post Number: 1
Registered: 9-2003
| | Posted on Thursday, October 02, 2003 - 9:41 am: | |
William,
Contact Richard von Medicus at Karosserie Ltd. His business is located in the Philadelphia area. He has a gentlemen working for him named Richard Mullin. Richard's team still uses the traditional three main classic metal forming methods (English Wheel, Power Hammer, and Power Shrinker). Karosserie also has some of the only Ferrari factory trained mechanics that are qualified to work on the all aluminum 360 Modena chassis'. Here is his webaddress www.karosserie.com, Good Luck !! |
Paul Bianco (Paulie_b)
Member
Username: Paulie_b
Post Number: 930
Registered: 1-2003
| | Posted on Thursday, October 02, 2003 - 6:00 am: | |
William, check your email for info. |
Paul Bianco (Paulie_b)
Member
Username: Paulie_b
Post Number: 925
Registered: 1-2003
| | Posted on Wednesday, October 01, 2003 - 1:09 pm: | |
William, call David at Servizio. I am pretty sure he knows one. He has the same phone number but has moved the shop a couple of miles away but still in Jupiter. At a better location and a nicer shop. |
john beaucher (Spider348)
Junior Member
Username: Spider348
Post Number: 108
Registered: 11-2002
| | Posted on Wednesday, October 01, 2003 - 5:27 am: | |
William, Paul Russell in Essex, MA has, or had, an exceptional panel beater. High end restorations are his specialty. Look at: www.paulrussell.com |
James Glickenhaus (Napolis)
Advanced Member
Username: Napolis
Post Number: 2678
Registered: 10-2002
| | Posted on Tuesday, September 30, 2003 - 8:38 pm: | |
Joel
002C shouldn't have been formed on a wheel. It should have been hammered on a buck. Are you sure he used a wheel for 002C's rebody? |
Joel Belser (Driver)
New member
Username: Driver
Post Number: 43
Registered: 9-2002
| | Posted on Tuesday, September 30, 2003 - 8:16 pm: | |
Tom Selby in southern N.J. is the man. He rebodied 002C. Uses an English wheel. I don't have his current address, but a search on the net should get it. |
S. Brent Cardani (Brentc)
Junior Member
Username: Brentc
Post Number: 60
Registered: 8-2003
| | Posted on Tuesday, September 30, 2003 - 9:34 am: | |
William,
I don't know anyone in those areas, but Mike Kleeves in Port Huron, MI is phenomenal. PM me and I will try to find his contact info if interested. |
William H (Countachxx)
Advanced Member
Username: Countachxx
Post Number: 3230
Registered: 2-2001
| | Posted on Tuesday, September 30, 2003 - 9:26 am: | |
Anybody know of some qualified panel beaters in the NE or near Miami ?
Thanks |