| Author |
Message |
Luigi Gatti (Luigi)
| | Posted on Sunday, November 04, 2001 - 5:18 pm: | |
Ernesto, please keep us posted on the solution of this problem.Thanks. |
Ernesto Sgroi (T88power)
| | Posted on Sunday, November 04, 2001 - 12:38 pm: | |
The Tubi cat pipes already come with brackets for both O2 sensors. The problem is that the ECU will know that there are no cats on the car and all sorts of "Check Engine" lights will come on. You have to trick the ECU into thinking that the cat is still working.
Ernesto |
Frank Parker (Parkerfe)
| | Posted on Sunday, November 04, 2001 - 12:32 pm: | |
I would just drill and tap another hole in each test pipe to use the other o2 sensors. |
Edward Gault (Irfgt)
| | Posted on Sunday, November 04, 2001 - 8:37 am: | |
Go to www.impalaclub.com/catalog/page12.htm and you will find them. |
Ernesto Sgroi (T88power)
| | Posted on Sunday, November 04, 2001 - 7:50 am: | |
Yes! I would very much appreciate you sending me any links.
Thanks!
Ernesto |
Edward Gault (Irfgt)
| | Posted on Saturday, November 03, 2001 - 9:26 pm: | |
If your sensors are 3 wire sensors then they are probably universal and can be obtained for $89.00 through one of my sources. Let me know if interested and I can get you the web site and pictures of the simulators. |
Ernesto Sgroi (T88power)
| | Posted on Saturday, November 03, 2001 - 8:36 pm: | |
Does anyone out there have any ideas for bypassing the aft-car O2 sensors on the 360? I am installing the Tubi bypass pipes very soon, and am working on this issue.
I know for other cars they sell the small electronic boxes that attach to the wiring and simulate the sensor voltage to the ECU thereby tricking it into thinking the car is still present and working. Are these universal? Any other ideas?
Thanks in advance for any help!! |