Valentine's Day present for your Ferr... Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » General Ferrari Discussion Archives » Archive through February 20, 2002 » Valentine's Day present for your Ferrari? « Previous Next »

Author Message
magoo (Magoo)
Intermediate Member
Username: Magoo

Post Number: 1916
Registered: 2-2001
Posted on Thursday, February 14, 2002 - 11:41 pm:   

OK, Sorry I see you have them on order from Rutlands.
magoo (Magoo)
Intermediate Member
Username: Magoo

Post Number: 1915
Registered: 2-2001
Posted on Thursday, February 14, 2002 - 11:39 pm:   

Eric, I thought Ed Gualt said he could tell you where to get them. Try him. I also agree without the targa top on, the cover does flap in the breeze when installed behind the seat.
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 135
Registered: 11-2001
Posted on Thursday, February 14, 2002 - 5:15 pm:   

Someone had mentioned that they purchased a set of tenax fasteners from T.Rutland's -- so, I gave them a call today: they have them (both with black buttons or silver buttons, and both with the Ferrari prancing horse embossed on them). Have 4 of the black ones on the way, plus some other goodies as well -- told you this valentine's day gift was getting out of hand .
John Bicsak (Funshipone)
New member
Username: Funshipone

Post Number: 22
Registered: 1-2002
Posted on Thursday, February 14, 2002 - 4:54 pm:   

I have 1984 308 GTS QV and one of my snaps broke and I got a replacement from my dealer Jack Cauley Ferrari in Detroit.
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 132
Registered: 11-2001
Posted on Thursday, February 14, 2002 - 8:10 am:   

Thanks Magoo...I placed a call to the dealer regarding the OEM Tenax fasteners. Apparently, FNA and the dealer recently underwent some sort of software changeover / update, so I'll have to wait until Friday for a response as to the availability / price. I have other options in case I don't have any luck with the dealer.

The cover that I purchased is the correct one (repro. though) -- it only lacks the Tenax fasteners.

That's a little disappointing, however, that the cover flaps loudly at highway speed .
magoo (Magoo)
Intermediate Member
Username: Magoo

Post Number: 1901
Registered: 2-2001
Posted on Wednesday, February 13, 2002 - 11:19 pm:   

My 308 has the orig. vinyl targa cover. It has four Tenax shaps. two on the floor near the seatbelt retractor and two on the upper shelf at the rear window. Looks great, Only problem is when you are driving highway speeds wind causes it to beat,flap,and it creates a distracting noise.
Michael A. Niles (Man90tr)
New member
Username: Man90tr

Post Number: 457
Registered: 4-2001
Posted on Tuesday, February 12, 2002 - 7:34 pm:   

The big 30K service with all the bells and whistles.
William H (Countachxx)
Member
Username: Countachxx

Post Number: 1048
Registered: 2-2001
Posted on Tuesday, February 12, 2002 - 7:33 pm:   

After all the glitches that showed up in the 512TR at Cavallino I think she's asking me for a Spring tune up which she will get before track season starts. I miss my big girl :-)
Leonardo Soccolich (Lens)
New member
Username: Lens

Post Number: 157
Registered: 3-2001
Posted on Tuesday, February 12, 2002 - 7:24 pm:   

My 328 GTB just had its 22.5k service at Algar. I was there all day because a routine inspection discovered the source of a fuel smell that I�ve been noticing on and off ever since I bought the car. Turns out the crossover pipe between the fuel tanks had a slight leak right near the drain plug. Sometime in my car�s life someone tried to repair the aluminum pipe by welding it. Not a good idea. Anyway, the pipe was replaced, along with the two hoses attaching it to the fuel tanks.

I thought I was in for a treat because the rumour at Algar was that the new Maserati was due in that day, but it never showed. Too bad!
Edward Gault (Irfgt)
Member
Username: Irfgt

Post Number: 811
Registered: 2-2001
Posted on Tuesday, February 12, 2002 - 6:54 pm:   

I posted some pictures of the snaps on the Technical side under the rear panel trim heading.
Edward Gault (Irfgt)
Member
Username: Irfgt

Post Number: 806
Registered: 2-2001
Posted on Tuesday, February 12, 2002 - 6:09 pm:   

I think I have some of the special snaps. They were quite expensive as I recall and I bought them in the event that I had a cover made for my car. I would have to find them as I do not know where I hid them. I think I paid $5.00 each. There is a fellow that sets up a store at the larger auto shows that had them. If you want some I can get some more at the Autofair at Charlotte in a month or so.
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 128
Registered: 11-2001
Posted on Tuesday, February 12, 2002 - 4:50 pm:   

Edward: Thanks for the info -- apparently I have purchased the cover that you referred to, because it does indeed have the pocket. There are currently four studs (two on bottom at rear bulkhead and two on top shelf), so it appears that this cover did not come with the necessary snaps installed. Looks like I'll have to track them down next -- boy, this "valentine's gift" is getting bigger by the minute .
Edward Gault (Irfgt)
Member
Username: Irfgt

Post Number: 805
Registered: 2-2001
Posted on Tuesday, February 12, 2002 - 4:37 pm:   

The cover that goes behind the seats snaps to the rear panel on the two little studs and the roof slides down into the envelope.
John Ames (Ameshouse)
New member
Username: Ameshouse

Post Number: 18
Registered: 1-2002
Posted on Tuesday, February 12, 2002 - 3:54 pm:   

Eric, The guy at Saratoga said he only made about 100 of the tops and had long since destroyed the molds. They sold for $1200 originally. Their website is http://www.saratogatech.com/about.htm

BTW the cover for my top has snaps at all 4 corners.
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 127
Registered: 11-2001
Posted on Tuesday, February 12, 2002 - 3:50 pm:   

Frank: From what you're saying, it sounds as if I've purchased the vinyl bag for storage; but that I still need to purchase a vinyl cover (w/ snaps) to hold the targa in place behind the seats -- does this sound right? - sorry to be getting off topic here, by the way.
Frank Parker (Parkerfe)
New member
Username: Parkerfe

Post Number: 20
Registered: 9-2001
Posted on Tuesday, February 12, 2002 - 3:44 pm:   

Now I'm confused. As recall my 328 had a vinyl bag that the targa top fit in that had no snaps as well as a rectangular piece of vinyl that had snaps at the corners to hold the targa top tight against the rear bulkhead. Which are you referring to ?
Mark C. Gordon (Markg)
New member
Username: Markg

Post Number: 117
Registered: 2-2001
Posted on Tuesday, February 12, 2002 - 3:43 pm:   

My 82 GTSi cover does have snaps on it; I think I will buy my car a new battery to replace the one that just died for Valentines.
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 125
Registered: 11-2001
Posted on Tuesday, February 12, 2002 - 3:28 pm:   

Frank: Oops, sorry about that -- I posted before reading yours. You mentioned the lack of snaps on your cover -- that would make sense now that I think about it. Apparently, the metal buttons on the rear bulkhead behind the seats are for the leather straps (on the targa) to snap to (?). I've never had the top removed, so this is sort of new to me. Looks like a good excuse to knock off early and go home to check this out .
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 124
Registered: 11-2001
Posted on Tuesday, February 12, 2002 - 3:22 pm:   

John: Incredible -- $1650??? That's amazing! I was following the bid initially (while contemplating -- err, I mean, trying to convince my wife that I REALLY needed this to help improve the performance of the 308 -- she didn't buy that either), but sort of lost interest as the price began climbing higher and higher. Had no idea, though, that it sold for that much. Apparently, it is a rare item. Would be very interested in a "group" type effort to have these remanufactured. Perhaps $1650 is a fair price, not sure.

Steve: LOL - I enjoyed that one...seems as if our "better half" has us all figured out! Oh well, it's fun trying to convince ourselves that we've got 'em fooled though, right?
Frank Parker (Parkerfe)
New member
Username: Parkerfe

Post Number: 19
Registered: 9-2001
Posted on Tuesday, February 12, 2002 - 3:13 pm:   

I don't think the cover came with snaps. I know the one on my 328 had no snaps.
Steve Magnusson (91tr)
New member
Username: 91tr

Post Number: 8
Registered: 1-2001
Posted on Tuesday, February 12, 2002 - 3:07 pm:   

Eric -- I had a sort of a similar "Valentine" experience. I asked my bride what she wanted for Valentine's Day, and she said: "Don't worry about it -- you've already bought it." (she's getting smarter as we get older) :-)
John Ames (Ameshouse)
New member
Username: Ameshouse

Post Number: 17
Registered: 1-2002
Posted on Tuesday, February 12, 2002 - 2:47 pm:   

Eric, the smoked glass top went for $1650 on ebay. I talked with the guy from Saratoga tops to see if he was going to make any more, but I think he isn't planning anything like that. Maybe if we ganged up on him...
BretM (Bretm)
Intermediate Member
Username: Bretm

Post Number: 1575
Registered: 2-2001
Posted on Tuesday, February 12, 2002 - 2:10 pm:   

My car doesn't have the vinyl cover either, I just leave the top behind the seat but it would be nice to protect the top and so that when you got above 75-80 it didn't start buffeting a little back there. When I take out my seats and redye them it would be a good chance to replace this cover. Thanks.
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 123
Registered: 11-2001
Posted on Tuesday, February 12, 2002 - 1:03 pm:   

Purchased the cover from T.Rutlands for roughly $188. Not to bad a price for a reproduction cover. It is very heavy duty vinyl material (with soft backing) and a slip pocket on one end. There are no snaps or anything so I'm not quite sure how it is supposed to fit -- may end up having to buy some snaps. I'll try it on for size tonight and let you know how well it works.
BretM (Bretm)
Intermediate Member
Username: Bretm

Post Number: 1574
Registered: 2-2001
Posted on Tuesday, February 12, 2002 - 12:46 pm:   

Hey Eric, where'd you get the vinyl cover from?
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 122
Registered: 11-2001
Posted on Tuesday, February 12, 2002 - 12:32 pm:   

I sure wish it was, Frank! What I meant to say was that I purchased the vinyl-type soft cover (for when you stow the targa behind the seats). Unfortunately, mine was missing when I purchased the car. Did you see the smoked glass top for sale on E-bay a couple of weeks ago? I was very tempted to buy it (wanted something like $750 or so). Maybe next time .
Frank Parker (Parkerfe)
New member
Username: Parkerfe

Post Number: 18
Registered: 9-2001
Posted on Tuesday, February 12, 2002 - 12:25 pm:   

Is it the smoked glass top you can get for the 308,328,348, and 355s ?
Eric Eiland (Eric308gtsiqv)
Junior Member
Username: Eric308gtsiqv

Post Number: 121
Registered: 11-2001
Posted on Tuesday, February 12, 2002 - 12:22 pm:   

Ordered a targa top cover for the 308 the other day. It just arrived via UPS -- and my wife told me happy valentine's day as she handed me the box . I won't tell her about the other items on back order though .
Willis Huang (Willis360)
Member
Username: Willis360

Post Number: 484
Registered: 8-2001
Posted on Tuesday, February 12, 2002 - 12:09 pm:   

Anyone getting anything for your Ferrari(s) on Valentine's Day?

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration