308 window motor cable? Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive through August 12, 2002 » 308 window motor cable? « Previous Next »

Author Message
Jerry W. (Tork1966)
Junior Member
Username: Tork1966

Post Number: 200
Registered: 7-2001
Posted on Tuesday, August 06, 2002 - 12:11 pm:   

Just for the cable. My spool was fine also.
J. Grande (Jay)
Member
Username: Jay

Post Number: 491
Registered: 10-2001
Posted on Tuesday, August 06, 2002 - 7:35 am:   

Jerry was that for the entire spool or just the cable? My spool works, I just don't have a cable.
Jerry W. (Tork1966)
Junior Member
Username: Tork1966

Post Number: 198
Registered: 7-2001
Posted on Tuesday, August 06, 2002 - 6:19 am:   

I got mine at Evans Automotive in Columbus (www.evansauto.com). I think it was about $50 or $60 for one of them. You will then need to go to a motorcycle shop to get the little metal ferrels to solder on the ends of the cable. Good luck, Jerry.
J. Grande (Jay)
Member
Username: Jay

Post Number: 489
Registered: 10-2001
Posted on Monday, August 05, 2002 - 8:23 pm:   

While restoring my 75 GT4 I took apart the drivers side door panel. The window motor works but the cable that goes around the network of pulleys has broken in two. I've seen the motors for sale, but does anyone sell just the spool with the cable? I've taken the spool apart and it seems like a new cable wire could go in there, but the cable is supposed to be a loop. Not sure how to fasten it so that it is a complete loop Any ideas on rebuilding it or where to get the spool?

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration