| Author |
Message |
Edward Gault (Irfgt)
Intermediate Member
Username: Irfgt
Post Number: 1727
Registered: 2-2001
| | Posted on Wednesday, August 07, 2002 - 7:58 pm: | |
I am not aware of any application of a York compressor clutch that uses the narrow drive belt that Ferrari uses. I purchased a clutch from T.Rutlands for mine. A good used one could be the best recourse. |
Frank Foster (Sparta49)
New member
Username: Sparta49
Post Number: 46
Registered: 3-2001
| | Posted on Wednesday, August 07, 2002 - 7:14 pm: | |
The compressor did not come with a clutch of any type |
Frank Foster (Sparta49)
New member
Username: Sparta49
Post Number: 45
Registered: 3-2001
| | Posted on Wednesday, August 07, 2002 - 7:13 pm: | |
The York compressor was 187.00 at Napa #258108 |
Hans E. Hansen (4re_gt4)
Junior Member
Username: 4re_gt4
Post Number: 87
Registered: 4-2002
| | Posted on Wednesday, August 07, 2002 - 5:59 pm: | |
I've heard that the Ferrari clutch is specific, designed for higher rpm's. Apparently the standard part will work, but with significantly shorter life. |
Robert Moore (Nail_it)
New member
Username: Nail_it
Post Number: 3
Registered: 6-2002
| | Posted on Wednesday, August 07, 2002 - 4:25 pm: | |
The york compressor is now being built by Climate Control and it is used in over the road trucks. I just completed a complete over-hual of mine today and I orded all the parts from a Freightliner truck dealer. The CC compressor number is ER210L |
J. Grande (Jay)
Member
Username: Jay
Post Number: 502
Registered: 10-2001
| | Posted on Wednesday, August 07, 2002 - 4:02 pm: | |
I'd be interested in this also. What's the part number on the York compressor and how much did it set you back. |
Frank Foster (Sparta49)
New member
Username: Sparta49
Post Number: 44
Registered: 3-2001
| | Posted on Wednesday, August 07, 2002 - 3:50 pm: | |
I have the compressor and a/c clutch out of my 84 308(Thanks Kelly and Kelly yes the parts are in a "bucket"). I have the new York compressor but I am having trouble finding the correct clutch. apparently the part is no longer available from Ferrari. I have been offered a used clutch but I would like to avoid that if at all possible. T. Rutlands suggested a York clutch but could not give me a part number. Does anyone have the York clutch number? |