Torque spec for pressure plate Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive through September 04, 2002 » Torque spec for pressure plate « Previous Next »

Author Message
'75 308 GT4 (Peter)
Intermediate Member
Username: Peter

Post Number: 1940
Registered: 12-2000
Posted on Monday, August 12, 2002 - 11:48 pm:   

Actually its there on pg. M 6, saying 3.5KgM (or 25.375 lbs-ft).
Mitchell Minh Le (Yelcab1)
Member
Username: Yelcab1

Post Number: 268
Registered: 11-2001
Posted on Monday, August 12, 2002 - 10:15 pm:   

I could not find the torque specs for the six 8mm x 1.25mm bolts holding the pressure plate to the flywheel on a GT4. All similar bolts on the engine section specify 25 Nm, so I used that spec. I bought a little insurance with red loctite.

Is that about right for those puny bolts?

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration