| Author |
Message |
Adam Goldman '86 TR (Icnsltmfg)
Member
Username: Icnsltmfg
Post Number: 384
Registered: 8-2001
| | Posted on Wednesday, August 14, 2002 - 3:31 pm: | |
My TR gave me trouble with the right window. It would go down but would not go up all of the way. Remove the door panel, not tough (do not forget the bolts under the plastic pocket), and check the bolts / nuts attaching the window to the cable. The do loosen up. Took a few times to adjust, but woorks well now. |
david handa (Davehanda)
Junior Member
Username: Davehanda
Post Number: 147
Registered: 5-2001
| | Posted on Wednesday, August 14, 2002 - 12:50 pm: | |
One possible quick fix (worked on my 308) is to roll the window down, and spray silicone spray down both window felt channels. This reduction in friction helps a great deal, and you may find the window will now close all the way. Just a temp fix, but if I did this twice a year, I had no further problems... |
david a haney (David512bb)
New member
Username: David512bb
Post Number: 10
Registered: 1-2002
| | Posted on Wednesday, August 14, 2002 - 6:52 am: | |
In my Boxer, the grease inside the lifter had hardened into wax, so a simple cleaning out and re-lube of the ring gear restored proper operation. |
Henryk (Henryk)
Junior Member
Username: Henryk
Post Number: 161
Registered: 8-2001
| | Posted on Tuesday, August 13, 2002 - 10:40 pm: | |
If it went up before, and now it doesn't, then something must be getting stuck. You will probably have to remove the door panels and investigate. |
Bill McAlister (Wmcalister)
New member
Username: Wmcalister
Post Number: 8
Registered: 9-2001
| | Posted on Tuesday, August 13, 2002 - 7:26 am: | |
My 1990 Tr window does not go up all the way. Is there a common problem? |