| Author |
Message |
John J Stecher (Jjstecher)
Member
Username: Jjstecher
Post Number: 265
Registered: 1-2002
| | Posted on Monday, August 19, 2002 - 12:29 am: | |
I've sometimes thought about taking the whole car apart and resoldering everything!! Dont worry Magoo you've been enough help throughout my time on this board I'll let you slide this time :p
John |
magoo (Magoo)
Advanced Member
Username: Magoo
Post Number: 3042
Registered: 2-2001
| | Posted on Monday, August 19, 2002 - 12:23 am: | |
Hey, Solder some ends on the pins. Just thought I would throw that out to you. Magoo |
magoo (Magoo)
Advanced Member
Username: Magoo
Post Number: 3041
Registered: 2-2001
| | Posted on Monday, August 19, 2002 - 12:21 am: | |
Hey buddy, Sorry I couldn't have been more help. It sounds like all the pins have to connect to make it work. Definetly a different animal. Sorry, Magoo |
John J Stecher (Jjstecher)
Member
Username: Jjstecher
Post Number: 263
Registered: 1-2002
| | Posted on Monday, August 19, 2002 - 12:08 am: | |
Thanks Magoo! Mine is strange it has a bunch of pins inside the actual front of the inner fender inside of a connector then a cable with a connection that come out of the door that matches up with the pins. There are in my estimates without counting 15-20 pins inside the connector and plug. My mechanic basically told me that these were wearing down and the pins just go after a while. I havent seen anyone that sells these parts or talked to anyone that knows where to get them...I'll have to give TRuts a call tomorrow!
By the way congrats on the 3000 posts!! I wish I had more time to hangout on here and chat but work has been SO busy!! Thanks for any help magoo!!
John |
magoo (Magoo)
Advanced Member
Username: Magoo
Post Number: 3040
Registered: 2-2001
| | Posted on Sunday, August 18, 2002 - 11:52 pm: | |
John, I have no idea at all what your set up is on your 348. I can only tell you that on my 308 there is a striker on the door jam. It can be adjusted with the screws in the striker. Be careful, if yours is like that, because you can strip the hex heads out of the screws because they are soft. Use the correct allen wrench tool. |
John J Stecher (Jjstecher)
Member
Username: Jjstecher
Post Number: 262
Registered: 1-2002
| | Posted on Sunday, August 18, 2002 - 11:42 pm: | |
Hey guys, I have my passenger window on the 348 not wanting to go up again. Seems to me that the door jam on the driver side door is going bad. Last time this happened I just took the conection in the driver side door jam out and plug it back in and bam it worked. This time however I am having no luck. You guys have any clue on what I can do to fix this problem? How much is a new jam? Thanks guys as always for the help!!
John |