Author |
Message |
James Selevan (Jselevan)
Junior Member Username: Jselevan
Post Number: 88 Registered: 6-2002
| Posted on Wednesday, August 28, 2002 - 1:16 am: | |
Thanks for the reply. This stuff is heavy. The struts are one thing, but the weight on the fiberglass lid worries me more. I am afraid that the constant vibration with the extra load will lead to cracks. I guess time will tell. Jim |
James Pai (Jaymus)
Junior Member Username: Jaymus
Post Number: 98 Registered: 2-2001
| Posted on Tuesday, August 27, 2002 - 6:07 pm: | |
That's wierd. I just replaced mine with an extra piece that Scott had/sent me (Thanks again by the way!) It looks excellent, and although it feels heavy, my struts still held up. Perhaps your struts have worn out? Get it re-pressurized or new ones? It makes it look much "cleaner" than the original foam, maybe it's the shiny reflective look. I like it. The foam is rather heavy, but it should hold without a problem. That glue is damn sticky and a b*tch to get off, I sugguest leaving it and get the structs fixed. James |
James Selevan (Jselevan)
Junior Member Username: Jselevan
Post Number: 82 Registered: 6-2002
| Posted on Friday, August 23, 2002 - 8:00 pm: | |
The original thread was archived. Here is the link to that discussion. Thanks for your help. http://server.ferrarichat.com/~ferrari/ferrarichat.com/discus/messages/112/78061.html?1030144372 Jim Selevan |
James Selevan (Jselevan)
Junior Member Username: Jselevan
Post Number: 80 Registered: 6-2002
| Posted on Friday, August 23, 2002 - 6:16 pm: | |
Scott - I followed your lead and added the JC Witney foam to my TR. HOWEVER, this stuff is VERY heavy. I am concerned about the weight on the fiberglass lid and mounting points. In fact, I have noticed spider crackes in the paint at the mounting point. Is your foam heavy? The struts can no longer hold the rear engine deck up!!! I am tempted to take it off, but dread the process of cleaning the spray glue from the under side of the lid. Is the weight of concern to you? Jim Selevan |