Need bolt/screw specs from TR

Log Out | Topics | Search Moderators | Edit Profile

Author Message Ric Rainbolt (Ricrain) Junior Member Username: Ricrain Post Number: 225 Registered: 2-2002 Posted on Friday, September 13, 2002 - 9:38 pm:    That's all I need. Thanks!! Ben Lobenstein 90 TR (Benjet) Member Username: Benjet Post Number: 773 Registered: 1-2001 Posted on Friday, September 13, 2002 - 8:28 pm:    Phillips head, about 2" length, a smidge over 1/8" diameter (sorry I don't have a metric ruler handy), black as shown here: HTH -Ben Ric Rainbolt (Ricrain) Junior Member Username: Ricrain Post Number: 221 Registered: 2-2002 Posted on Friday, September 13, 2002 - 4:43 pm:    One of the PO's of my TR has removed the two screws that hold the two halves of the steering column cover together. I'm talking about the two piece, black, textured plastic cover that goes right behind the steering wheel. The upper piece has the VIN plate on it, and the bolts go upward, through the bottom piece. I ordered the bolts from Ferrari, but they're on semi-permanent back order. Could someone remove one of theirs and measure it for me (type, color, diamter of the shank, length of the shank, etc.)? Even a digital pic with a ruler for reference would be enough. Thanks!