| Author | Message | ||
| Paul (Pcelenta)
Junior Member Username: Pcelenta Post Number: 143 Registered: 7-2002 |
mitch, I guess this explains why I have some extra gaskets left over from my gasket set. ;) | ||
| Fred (Iluv4res)
Junior Member Username: Iluv4res Post Number: 144 Registered: 8-2002 |
Peter, I just thought the image was digitally enhanced!!! | ||
| '75 308 GT4 (Peter)
Intermediate Member Username: Peter Post Number: 2043 Registered: 12-2000 |
Okay, we've got a couple of winners here. Paul(Pcelenta) was KINDA right first off (wrong that it does not attach to the block, but the intake manifold). I understood the "fast-idle housing" to be the part which this gasket belongs to, but that's a secondary function of this "coolant yoke" that Bret mentions. Which it is. The F.I. cars had a similar set-up, but the hole was a different shape (as he mentioned). The oil-pump pick-up has three-bolts by the way... Paul Newman and Mitch have the description bang-on. They share first prize, Bret gets second, Paul gets third...  Fred, what I'm most impressed with is how clean my hands are. Usually they have a fair collection of scars/cuts and permanent grease stains. | ||
| Fred (Iluv4res)
Junior Member Username: Iluv4res Post Number: 132 Registered: 8-2002 |
Wow, what a lifeline on your palm. | ||
| Mitchell Le (Yelcab1)
Member Username: Yelcab1 Post Number: 403 Registered: 11-2001 |
Two gaskets each car, they fit between the intake manifolds (fore and aft) and the cross-over pipe that leads to the waterpump. On this pipe also fits the throttle linkages. | ||
| Paul Newman (Newman)
Member Username: Newman Post Number: 504 Registered: 12-2001 |
Gasket between coolant manifold and intake on a carb 308 | ||
| BretM (Bretm)
Advanced Member Username: Bretm Post Number: 2670 Registered: 2-2001 |
Steering rack cover maybe. Alright, I'm putting too much thought into this. I'll stop. | ||
| j scott leonard (Jscott)
Junior Member Username: Jscott Post Number: 176 Registered: 1-2002 |
You guys have way too much time on your hands! | ||
| BretM (Bretm)
Advanced Member Username: Bretm Post Number: 2669 Registered: 2-2001 |
Looks similar to the coolant yoke (top of the head) gaskets, but those have circular holes. I'd have to say the engine oil pump (pickup), if not the trans oil pump. | ||
| Paul (Pcelenta)
Junior Member Username: Pcelenta Post Number: 136 Registered: 7-2002 |
oh, wait fast idle housing to block gasket...looks almost the same. | ||
| TomD (Tifosi)
Intermediate Member Username: Tifosi Post Number: 1413 Registered: 9-2001 |
exhust gasket | ||
| '75 308 GT4 (Peter)
Intermediate Member Username: Peter Post Number: 2041 Registered: 12-2000 |
Nope, try again... | ||
| Paul (Pcelenta)
Junior Member Username: Pcelenta Post Number: 134 Registered: 7-2002 |
intake manifold to head on a carb car. | ||
| '75 308 GT4 (Peter)
Intermediate Member Username: Peter Post Number: 2039 Registered: 12-2000 |
Where will one find this gasket (and its not GT4 specific, it can be found on other 308's)?  |