| Author |
Message |
Jim DeRespino (Jimbo)
New member
Username: Jimbo
Post Number: 21
Registered: 10-2001
| | Posted on Thursday, October 03, 2002 - 1:19 pm: | |
I am 95% sure. I have taken mine apart 10+ times trying to locate a short in the system, change the bulbs to a brighter type. etc. I don't know how else you would access that area. As I recall, there is a piece of glass and a cardboard "gasket" above the plastic piece.
Good luck. |
Madferraristi (Madferraristi)
New member
Username: Madferraristi
Post Number: 26
Registered: 6-2001
| | Posted on Thursday, October 03, 2002 - 9:48 am: | |
I already have the three switches out and I see the tabs but I am hesitant to pry/bend the lens to get the tabs free. Are you sure?
I need to remove the assembly as I am dismantling the car for a project. Yes I have parts available. |
Jim DeRespino (Jimbo)
New member
Username: Jimbo
Post Number: 20
Registered: 10-2001
| | Posted on Thursday, October 03, 2002 - 3:59 am: | |
The plastic piece has tabs on the ends that snap into place. I believe you can gently bend the lens to disengage the end tabs. Also, there are 6 bulbs to replace. If there is no light, the problem probably lies elsewhere |
Ric Rainbolt (Ricrain)
Member
Username: Ricrain
Post Number: 265
Registered: 2-2002
| | Posted on Wednesday, October 02, 2002 - 11:34 pm: | |
You have to pull the three overhead pushbutton switch bodies. |
Madferraristi (Madferraristi)
New member
Username: Madferraristi
Post Number: 25
Registered: 6-2001
| | Posted on Wednesday, October 02, 2002 - 11:25 pm: | |
How does one remove the main plastic lense from the overhead console in order to change the light bulb? |