| Author | Message | ||
| Ric Rainbolt (Ricrain)
Member Username: Ricrain Post Number: 268 Registered: 2-2002 |
I couldn't see it well enough on the first pic. On the 2nd, it's obvious...  The little plastic spacer that goes in the seat belt attachment bolts. | ||
| Erik R. Jonsson (Gamester)
Junior Member Username: Gamester Post Number: 70 Registered: 3-2002 |
Peter, we have an emailed in winner... Hi again We think that we have cracked where this part belongs? seat belt bolt , plastic cover.it goes between the bolt and the seat belt fixing bracket ??????? I hope this is correct, because my guys in the workshop are driving me nuts looking at all the 308s. regards phil {QV London} Great contest, I thought it would be a bit easier, yet my original photo sux. And now for my next trick! Thanks for playing | ||
| '75 308 GT4 (Peter)
Intermediate Member Username: Peter Post Number: 2079 Registered: 12-2000 |
You stumped me Erik, I thought for sure it was that... Ok, I'm guessing the seal for the little lever on the brake caliper itself, for the parking brake mechanism...  | ||
| Erik R. Jonsson (Gamester)
Junior Member Username: Gamester Post Number: 69 Registered: 3-2002 |
nope | ||
| Ken (Allyn)
Member Username: Allyn Post Number: 521 Registered: 10-2001 |
Handbrake lever bushing. | ||
| Erik R. Jonsson (Gamester)
Junior Member Username: Gamester Post Number: 68 Registered: 3-2002 |
a clearer pic on my freshly releathered center console.  | ||
| Henryk (Henryk)
Member Username: Henryk Post Number: 315 Registered: 8-2001 |
Dust seal for the piston within the brake caliper. | ||
| BretM (Bretm)
Advanced Member Username: Bretm Post Number: 2724 Registered: 2-2001 |
How bout the washer for the parking brake pulley, so the nut doesn't bind on it. Just a guess going with the brake theme. | ||
| Mitchel DeFrancis (4re308)
Member Username: 4re308 Post Number: 690 Registered: 6-2001 |
Kinda looks like one of those horse sized vitamin c pills. Oops sorry, it looks like a shifter bushing of some sort. | ||
| Erik R. Jonsson (Gamester)
Junior Member Username: Gamester Post Number: 67 Registered: 3-2002 |
nope, no cable runs thru it. | ||
| Mitchell Le (Yelcab1)
Member Username: Yelcab1 Post Number: 429 Registered: 11-2001 |
Then it is probably for the clutch cable to slide through | ||
| Erik R. Jonsson (Gamester)
Junior Member Username: Gamester Post Number: 66 Registered: 3-2002 |
Dang- Peter that was sooooo close. | ||
| '75 308 GT4 (Peter)
Intermediate Member Username: Peter Post Number: 2069 Registered: 12-2000 |
Teflon bushing for the parking-brake cable to slide through (its mounted on a small tab welded to the frame of the car, both sides, for each brake). | ||
| TomD (Tifosi)
Intermediate Member Username: Tifosi Post Number: 1480 Registered: 9-2001 |
well it isn't in my hand harlan | ||
| BretM (Bretm)
Advanced Member Username: Bretm Post Number: 2715 Registered: 2-2001 |
Is it threaded? How big is the hole? It seems to me it would be somewhere in the interior since it's plastic, maybe a switch backing, etc. Another pic would help. | ||
| Erik R. Jonsson (Gamester)
Junior Member Username: Gamester Post Number: 65 Registered: 3-2002 |
Oh go on... It has a hole in it as well! Matt-nope | ||
| bruce wellington (Bws88tr)
Member Username: Bws88tr Post Number: 997 Registered: 4-2002 |
who paul?? me or tom? | ||
| Paul (Pcelenta)
Junior Member Username: Pcelenta Post Number: 180 Registered: 7-2002 |
I'm glad I wasn't the only one with a dirty mind | ||
| bruce wellington (Bws88tr)
Member Username: Bws88tr Post Number: 996 Registered: 4-2002 |
an i.u.d. ??? | ||
| Hans E. Hansen (4re_gt4)
Junior Member Username: 4re_gt4 Post Number: 247 Registered: 4-2002 |
It looks like a silver horse being born from your palm. | ||
| Harlan Mott (Hmott3)
Junior Member Username: Hmott3 Post Number: 208 Registered: 12-2001 |
TomD, Sorry to hear about that, being dime sized and all. | ||
| TomD (Tifosi)
Intermediate Member Username: Tifosi Post Number: 1473 Registered: 9-2001 |
condom | ||
| magoo (Magoo)
Advanced Member Username: Magoo Post Number: 3210 Registered: 2-2001 |
Erik, Take another pic. That is anybodys guess. | ||
| Matt Lemus (Mlemus)
Junior Member Username: Mlemus Post Number: 220 Registered: 8-2002 |
The base of the shifter? | ||
| Erik R. Jonsson (Gamester)
Junior Member Username: Gamester Post Number: 61 Registered: 3-2002 |
Nothing too difficult here, lets have a new winner here!  I'd have to say I need a newer digicam... yes that is a part in my hand, it is dime size round and plastic. |