| Author |
Message |
Bill Sebestyen (Bill308)
Member
Username: Bill308
Post Number: 372
Registered: 5-2001
| | Posted on Friday, October 11, 2002 - 4:52 pm: | |
WSM - Work Shop Manual
OM - Owners Manual
PC - Parts Catalog |
Paul Newman (Newman)
Member
Username: Newman
Post Number: 565
Registered: 12-2001
| | Posted on Friday, October 11, 2002 - 12:46 am: | |
ATDC- after top dead center, BTDC- Before top dead center |
Hans E. Hansen (4re_gt4)
Member
Username: 4re_gt4
Post Number: 271
Registered: 4-2002
| | Posted on Thursday, October 10, 2002 - 11:01 pm: | |
I am currently set to 10deg advanced. No probs. |
ARIE BONSELAAR (Arie)
New member
Username: Arie
Post Number: 18
Registered: 5-2001
| | Posted on Thursday, October 10, 2002 - 11:01 pm: | |
thanks for the info!
but what is WSM OM and ATDC BTDC?
THANKS AGAIN... |
Paul Newman (Newman)
Member
Username: Newman
Post Number: 562
Registered: 12-2001
| | Posted on Thursday, October 10, 2002 - 9:04 pm: | |
3 degrees ATDC at idle if the car still has the R1 and R2 points system and 5 degrees BTDC off idle at say 1200rpm or so. 7 degrees BTDC at idle if you eliminated the one set of points. Thats what Im running currently and it works well. |
Philip Airey (Pma1010)
New member
Username: Pma1010
Post Number: 22
Registered: 7-2002
| | Posted on Thursday, October 10, 2002 - 8:45 pm: | |
Either the WSM or OM has the specs and the distributor advance curve. The idle/microswitch off idle settings are also in the same
Philip |
ARIE BONSELAAR (Arie)
New member
Username: Arie
Post Number: 17
Registered: 5-2001
| | Posted on Thursday, October 10, 2002 - 8:21 pm: | |
NOT THERE! I WOULD LIKE TO FIND THE SPECS TO SET MY TIMING, IT KEEPS POPPING TRUE MY CARBS WHILE I GIVE IT GAS.. |
Edward Gault (Irfgt)
Intermediate Member
Username: Irfgt
Post Number: 2088
Registered: 2-2001
| | Posted on Thursday, October 10, 2002 - 8:08 pm: | |
On the decal beside the engine compartment. |
ARIE BONSELAAR (Arie)
New member
Username: Arie
Post Number: 16
Registered: 5-2001
| | Posted on Thursday, October 10, 2002 - 7:35 pm: | |
308 79 gtb timing.any place where i can find this setting? |