FerrariChat.com: Brake pad removal on 360 Modena

Brake pad removal on 360 Modena Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive through November 06, 2002 » Brake pad removal on 360 Modena

« Previous Next »

Author

Message

Dave (Parts_man_soda)
New member
Username: Parts_man_soda

Post Number: 26
Registered: 8-2002

Posted on Sunday, October 27, 2002 - 6:46 pm:

Glad to help.
Dave

Dr. Anthony Lizano (Docapl)
New member
Username: Docapl

Post Number: 21
Registered: 4-2002

Posted on Sunday, October 27, 2002 - 1:06 am:

Thanks Dave... that is great information.

Tony

Dave (Parts_man_soda)
New member
Username: Parts_man_soda

Post Number: 25
Registered: 8-2002

Posted on Saturday, October 26, 2002 - 10:00 pm:

http://www.sodacoms.com/Downloads/Ferrari%20360%20Pad%20Replacment%20Tech.exe

This is in eFax format. Auto EXE file.
4 pages.
Dave
www.sodacoms.com

Dr. Anthony Lizano (Docapl)
New member
Username: Docapl

Post Number: 20
Registered: 4-2002

Posted on Friday, October 25, 2002 - 8:00 pm:

I was looking at the brake caliper/pad assembly and noticed the way the pads are held down is a little different than the Brembo set up used by recent Porsche's. On the Porsche's there are small cotter pins that lock the transverse rods in place that hold the pads in. The Ferrari does not seem to bave these locking pins. Are the transverse rods locked in by anything other than the spring plate, or can they just be taped out the other side while pushing the spring plate down ?

Thanks.

Administration