| Author |
Message |
Erik R. Jonsson (Gamester)
Junior Member
Username: Gamester
Post Number: 184
Registered: 11-2000
| | Posted on Wednesday, November 06, 2002 - 1:42 pm: | |
I have repaired 2 stalk switches which caused intermittent problems. Carefully pull the knob end off the stalk. Inside there is 2 contacts with wires soldered to them. Both I repaired the solder joint was faulty and resoldering corrected the issue. |
Chris Shenberger (Shenbec)
New member
Username: Shenbec
Post Number: 16
Registered: 4-2002
| | Posted on Monday, October 28, 2002 - 10:50 am: | |
You can start with listening for the relays to click. If they do not, it is probably the stalk, wiring, fuse, connector (but the lights do come on so?) If the relays click, do you here the motors turning (could just be a loose nut on the motor arm, ask me how I know about that one). Let us know what you find out. |
Collin Hays (Chaysintexas)
New member
Username: Chaysintexas
Post Number: 28
Registered: 4-2002
| | Posted on Monday, October 28, 2002 - 9:48 am: | |
This time, my headlights will turn on (lamps are on), but they don't pop up. Any ideas besides the obvious fuse/relay check for the lifters? Thanks for your help. |
|