Multimeters Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive through May 10, 2002 » Multimeters « Previous Next »

Author Message
F-J'87EuroTR (Ferrarijoe)
Junior Member
Username: Ferrarijoe

Post Number: 93
Registered: 5-2001
Posted on Wednesday, April 10, 2002 - 6:49 pm:   

Cory,

I have had a Durst MM-78 DEDICATED AUTOMOTIVE multimeter for 4 years and it performs as good as the Fluke. It is made in Australia and cost around $200.00 USD. It comes with a temp sensor, ignition pick-up and rubber protective cover like the Fluke. It is worth checking out. You can see it here: http://www.durst.com.au/home.htm

Joe


cory mitchell (Mitch328)
New member
Username: Mitch328

Post Number: 19
Registered: 8-2001
Posted on Tuesday, April 02, 2002 - 5:28 pm:   

My electrical teacher told me today that the sales rep for Fluke would always start off a demonstration by throwing one of the meters across the room then pick it up and demo all its functions without any problems. Sounds like a winner.
BretM (Bretm)
Intermediate Member
Username: Bretm

Post Number: 2103
Registered: 2-2001
Posted on Tuesday, April 02, 2002 - 3:33 pm:   

I have one I got from radio shack, around $100. Works great.
Ken Thomas (Future328driver)
Junior Member
Username: Future328driver

Post Number: 57
Registered: 12-2001
Posted on Tuesday, April 02, 2002 - 8:05 am:   

Cory,
I have a Fluke that I use for stuff around the house. I would recommend spending the money since they last forwever. You might check local electonics wholesalers - they may be able to get you a better price than other hardware stores. I got mine at Home Depot and if I recall correctly, it was really not too much of a wallet buster.
Brian stewart (Eurocardoc)
Junior Member
Username: Eurocardoc

Post Number: 245
Registered: 11-2001
Posted on Monday, April 01, 2002 - 6:48 pm:   

Fluke, spend the money, always pays IMHO
cory mitchell (Mitch328)
New member
Username: Mitch328

Post Number: 18
Registered: 8-2001
Posted on Monday, April 01, 2002 - 3:28 pm:   

Thanks Richard, but the meter I buy will actually be used in my automotive electrical class and also my job working under my Ferrari mechanic. If I have to spend the big bucks I will. After all, I'm sure I'll be using it quite a bit.
Richard Stephens (Dino2400)
New member
Username: Dino2400

Post Number: 46
Registered: 10-2001
Posted on Monday, April 01, 2002 - 2:52 pm:   

I'm sure others will recommend some excellent, full-featured meters out there that would be nice for your home garage. But I've got a tip on a great one to carry with you in the car. Radio Shack has a digital multimeter that folds open to reveal the leads and it's about 2" x4" and less than an inch thick. I keep one in my glovebox. It's model #22-802. List price is about $25 but they often have them sitting near the cash register onsale for $15. Usual ac/dc voltage, ohm, continuity with audible signal, and shuts off after a few minutes to save the battery.
cory mitchell (Mitch328)
New member
Username: Mitch328

Post Number: 17
Registered: 8-2001
Posted on Monday, April 01, 2002 - 2:42 pm:   

Anyone out there have a suggestion on buying a good automotive meter that has all the functions I'll need but won't break the bank. Still have a whole lot of other tools to buy. Flukes are dreamy but their prices are shocking (pun intended).

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration