Author |
Message |
stu cordova (Balataboy)
Member Username: Balataboy
Post Number: 329 Registered: 4-2001
| Posted on Tuesday, December 24, 2002 - 11:06 pm: | |
In addition to the smoke, it'll kind of smell/stink for a while too! Alarming at first, bit it wears off within a few hundred miles. Welcome! |
Red (Redhead)
Junior Member Username: Redhead
Post Number: 92 Registered: 12-2001
| Posted on Tuesday, December 24, 2002 - 1:04 pm: | |
The smoke from a new tubi is expected. All the old weld pieces that fell off inside, and the coating they put on it is burning off. Dont worry about, just enjoy!!! Cheers!!
|
MBN (Mbn)
New member Username: Mbn
Post Number: 2 Registered: 12-2002
| Posted on Monday, December 23, 2002 - 5:06 pm: | |
Red,hi thanx...i was thinking about the screws but thought 2 come here and look cuz i post this before i went out :D Test drive went ok...just some smoke from the right side pipe ?? maybe cuz its new ?? and the hoses is sucking air..so i guess ill plug a screw :D ..thanx Red..please guys if you know some ideas or help..please post... |
Red (Redhead)
Junior Member Username: Redhead
Post Number: 91 Registered: 12-2001
| Posted on Monday, December 23, 2002 - 3:01 pm: | |
MBN-- Finds some screws, and just plug the hoses, and tie strap them up. These is no harm in doing this, and no emissons related problems. Hope this helps. Cheers |
Noelrp (Noelrp)
Junior Member Username: Noelrp
Post Number: 137 Registered: 8-2001
| Posted on Monday, December 23, 2002 - 11:04 am: | |
Call Tubi Style USA. 616-396-1979 or 800-421-5604. They are very helpful & responsive. |
MBN (Mbn)
New member Username: Mbn
Post Number: 1 Registered: 12-2002
| Posted on Monday, December 23, 2002 - 2:11 am: | |
Hi first i would like to say hi 2all my first post here my problem is im installing a TubiExhaust(360M F1 2001) all went great but when i came in2 the vacuum operated valve(stock Exhaust)and how 2 remove it so i searched here and there..found out its ok if i remove the system BUT..there is a hoses that conect to a small gray unit from the vacuum operated valve ??? so my Q is. what should i do..keep the hose or remove it..? and if i do so..should i close the hole in gray unit.. sorry never done this before if some one can help or direct me 2 manula or pic's i would be thankful.. here is a link to some pic's http://photos.yahoo.com/mbnviper |