| Author |
Message |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1297
Registered: 1-2001
| | Posted on Tuesday, January 07, 2003 - 8:23 pm: | |
mike -- Do a search on "308 offset" here. |
Christopher McCormick (92_348ts)
Junior Member
Username: 92_348ts
Post Number: 80
Registered: 6-2002
| | Posted on Tuesday, January 07, 2003 - 8:22 pm: | |
Gene-Here are a few. I have some more written down somewhere, I will let you know when I find them.
www.kinesismotorsport.com
www.dimex-group.com
www.hamann-motorsport.de
www.koenig-specials.com
www.garedcars.com
www.sacwheels.com
www.wheelpower.com |
mike 308 (Concorde)
Junior Member
Username: Concorde
Post Number: 84
Registered: 8-2002
| | Posted on Tuesday, January 07, 2003 - 5:07 pm: | |
That's the same bolt pattern as the 308/QV. I wonder what the offsets, etc would be for 17" aftermarket wheels for a 308? |
Rob Schermerhorn (Rexrcr)
Junior Member
Username: Rexrcr
Post Number: 78
Registered: 11-2002
| | Posted on Tuesday, January 07, 2003 - 4:03 pm: | |
295 on back should fit. That's what Challenge ran. |
Gene Agatep (Gagatep)
Junior Member
Username: Gagatep
Post Number: 153
Registered: 8-2002
| | Posted on Tuesday, January 07, 2003 - 2:50 pm: | |
I'm thinking of
front 17" x 8.5" wheels with 245/40/17 tires
rears 17" x 11" wheels with 285/40/17 tires
(no spacers needed)
how wide of tires can i go on the back? |
Rob Schermerhorn (Rexrcr)
Junior Member
Username: Rexrcr
Post Number: 71
Registered: 11-2002
| | Posted on Tuesday, January 07, 2003 - 9:15 am: | |
Offset is 60 mm front and 80 mm rear.
This is standard 348 and 355 with the exception of Speciale and 348 Spider, which have different spec for the rear. I'm not sure about 355 Spider specification in the rear. |
Gene Agatep (Gagatep)
Junior Member
Username: Gagatep
Post Number: 151
Registered: 8-2002
| | Posted on Monday, January 06, 2003 - 10:54 pm: | |
thanks Chris
please post which websites
|
Christopher McCormick (92_348ts)
Junior Member
Username: 92_348ts
Post Number: 78
Registered: 6-2002
| | Posted on Monday, January 06, 2003 - 7:12 pm: | |
The bolt pattern is 5 on 108mm, however I don't know the offset.
Also, I have several website addresses of various wheel manufacturers that make wheels for your application if interested. |
Gene Agatep (Gagatep)
Junior Member
Username: Gagatep
Post Number: 150
Registered: 8-2002
| | Posted on Monday, January 06, 2003 - 6:24 pm: | |
what is the
348, 355 wheel bolt pattern??????
i'm looking for a set of wider wheels and tires.
tirerack's website doesn't have info. |