| Author |
Message |
'75 308 GT4 (Peter)
Intermediate Member
Username: Peter
Post Number: 2366
Registered: 12-2000
| | Posted on Friday, January 10, 2003 - 3:04 pm: | |
Larry, are you going to be up in Vancouver any time soon? If so, bring the pump and seal and maybe I can help...
Shoot me an email... |
billy bob (Fatbillybob)
Junior Member
Username: Fatbillybob
Post Number: 136
Registered: 8-2002
| | Posted on Thursday, January 09, 2003 - 6:04 pm: | |
sorry larry...that does not instill confidence for me actually. |
Larry (Larry)
Junior Member
Username: Larry
Post Number: 84
Registered: 3-2001
| | Posted on Thursday, January 09, 2003 - 5:57 pm: | |
... shouldn't be; came w/the complete gasket/seal kit from Parts Source. will give antifreeze a try.
Thanks |
billy bob (Fatbillybob)
Junior Member
Username: Fatbillybob
Post Number: 135
Registered: 8-2002
| | Posted on Thursday, January 09, 2003 - 12:59 am: | |
You may have wrong seal. Lube the ceramic with rubber boot in antifreeze. Make sure the female part is clean and deburred of old rusty antifeeze gunk. It should slide right in |
Larry (Larry)
Junior Member
Username: Larry
Post Number: 83
Registered: 3-2001
| | Posted on Thursday, January 09, 2003 - 12:55 am: | |
Oops, it's a 75 308. good night. |
Larry (Larry)
Junior Member
Username: Larry
Post Number: 82
Registered: 3-2001
| | Posted on Wednesday, January 08, 2003 - 11:07 pm: | |
not having any luck fitting the seal; ceramic side in center impeller cut away, rubber side out. rubber bunches up and won't fit in the impeller properly. should i file the O/D of the ceramic so there's more room? Thanks. |