| Author |
Message |
Richelson (Richelson)
Member
Username: Richelson
Post Number: 840
Registered: 12-2001
| | Posted on Wednesday, January 22, 2003 - 4:57 pm: | |
Someone had mentioned that they purchased a new belt for ~$8 at auto value or the like. Does anyone have the part # for auto value/ |
djmonk (Davem)
Junior Member
Username: Davem
Post Number: 165
Registered: 1-2002
| | Posted on Tuesday, January 21, 2003 - 10:59 pm: | |
Steve the Gates belt used is actually designed for industial applications.
Try an industial or electrical motor place in the yellow pages you might find it there. But as Mr. Magnusson pointed out its only a $20 dollar belt call Trutlands or a dealer to ship it. |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1334
Registered: 1-2001
| | Posted on Tuesday, January 21, 2003 - 8:37 pm: | |
Steve -- You asked for the part number not whether or not you could actually find and buy just one retail at a price better than from T. Rutlands, FPsExchange. etc.;). Seriously, here's a good post from Verell Boaen with the Gates details:
http://www.ferrarichat.com/discus/messages/112/90465.html
It's an odd little belt with a small cross-section and a very untypical V-angle so I don't think that it's a widely standardized design. If you find an alternative please post (but time is money too). |
Steve (Steve)
Member
Username: Steve
Post Number: 286
Registered: 2-2001
| | Posted on Tuesday, January 21, 2003 - 7:58 pm: | |
Steve I checked out the gates number and even gates website didn't recognize it? Where did you get the number and does it cross reference maybe a dayco? Thanks |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1322
Registered: 1-2001
| | Posted on Tuesday, January 14, 2003 - 10:10 pm: | |
It's Gates 7M975 (or the slightly longer 7M1000) |
Steve (Steve)
Member
Username: Steve
Post Number: 283
Registered: 2-2001
| | Posted on Tuesday, January 14, 2003 - 10:03 pm: | |
Does anyone know if the alt/wp belt for the 308 is made by Dayco? I know it is 38" and was wondering if anyone cross referenced it to a belt mfg.Does anyone have a pt. #? |