Author |
Message |
Jan W (2fst4u)
New member Username: 2fst4u
Post Number: 3 Registered: 1-2003
| Posted on Tuesday, January 28, 2003 - 6:57 am: | |
Thanks all, that was what I suspected. The american version states to have 288 Nm so my guess was that the euorpean version should be around 300 Nm. Not a big deal but it's fun to know what i got. |
Craig Dewey (Craigfl)
Member Username: Craigfl
Post Number: 528 Registered: 1-2001
| Posted on Monday, January 27, 2003 - 2:49 pm: | |
Steve, My book shows the "euro" 328 (which is really classified by Ferrari as the "non US" version) to be 270HP and 9.8:1 CR. The "CH" european version is shown as the same as US spec HP and CR. |
Steve Magnusson (91tr)
Intermediate Member Username: 91tr
Post Number: 1361 Registered: 1-2001
| Posted on Monday, January 27, 2003 - 2:24 pm: | |
Jan -- for the 9.8:1 CR 328 engine from the: "328GTS 2a edizione - numero cat. 513/88 - 9/88 1988" on the http://www.owners.ferrari.com site 270 bhp @ 7000 RPM 304 Nm @ 5500 RPM I noticed there's also a 1988 328GTS standard (euro) manual 518/88 that shows a 9.2:1 CR and slightly lower bhp and torque -- is this just a misprint or does a 1988 328 standard (euro) come in two flavors? |
Ton Visser (Lion315)
Junior Member Username: Lion315
Post Number: 117 Registered: 12-2002
| Posted on Monday, January 27, 2003 - 2:10 pm: | |
Jan, Check out this site! http://www.supercars.net/garages/giangi/1v2.html Ton |
Ton Visser (Lion315)
Junior Member Username: Lion315
Post Number: 116 Registered: 12-2002
| Posted on Monday, January 27, 2003 - 2:02 pm: | |
If I remember correctly it is 288 Nm. Ton |
Jan W (2fst4u)
New member Username: 2fst4u
Post Number: 2 Registered: 1-2003
| Posted on Monday, January 27, 2003 - 9:34 am: | |
Is there anybody who has the torque figures for the -88 328 GTS 270 bhp / 7000 rpm. |